Abstract:We studied the microstructure evolution of Mg-4Y-3Nd-2Sm-0.5Zr alloy by quasi-in-situ electron backscatter diffraction (EBSD) along with several strains under compression tests, which provided direct evidence for the influence of different twin-twin geometric structure on the twinning behavior. The results showed that the mechanical properties of the alloy were higher than traditional magnesium alloys (the maximum compressive strength reaches 402.5 MPa) due to the strengthening effect of Sm and Nd elements addition on solution strengthening, precipitation strengthening, and grain refinement. Combined with the quasi-in-situ EBSD technique, two different twin-twin geometric structures, 'parallel structure' and 'cross structure', were observed directly in the alloy. In the later stage of deformation, for 'parallel structure', residual stress and a large number of dislocations mainly existed in the twin boundary and tip position. For the 'cross structure', there was a lot of dislocation density in the interior of twins after fusion. The twin growth rate of 'parallel structure' was much faster than that of 'cross structure' because the stress of twins was mainly concentrated on the tip of twin. When the movement for the tip of twin was blocked, the growth rate of twin would be obviously decreased. Moreover, the 'cross structure' was easy to produce closed space. Due to the constraints of surrounding twins, the confined space was easy to stress concentration, thus inhibiting the growth of twins. At the same time, the 'cross structure' of twins needed a more external force to continue to deform, which also served as a strengthening structure.

Twinning Behavior and Lattice Rotation in a Mg–Gd–Y–Zr Alloy under Ballistic Impact

Simulation of Ballistic Performance of Coarse-Grained Metals Strengthened by Nanotwinned Regions

Texture Evolution and Recrystallization Mechanism in a Mg–3Al–1Zn Alloy under Ballistic Impact

Highly Localized Shear Deformation in a Mg–Al–Mn Alloy Subjected to Ballistic Impact

Investigation of the twin-induced adiabatic shear bands evolution in a Mg-Al-Mn alloy under ballistic impact

Abnormal Twinning Behavior and Constitutive Modeling of a Fine-Grained Extruded Mg–8.0Al–0.1Mn–2.0Ca Alloy under High-Speed Impact along Various Directions

Twin-twin Geometric Structure Effect on the Twinning Behavior of an Mg-4Y-3Nd-2Sm-0.5Zr Alloy Traced by Quasi-in-situ EBSD

Characterization of Adiabatic Shear Bands in AM60B Magnesium Alloy under Ballistic Impact

Microstructure Evolution and Selection Behavior of Twin Variants of Mg-5Gd-3Y-0.5Zr Alloy during Secondary Deformation

Microstructure Evolution of Adiabatic Shear Bands in Am60b Magnesium Alloy under Ballistic Impact

Deformation mechanism of fine grained Mg–7Gd–5Y–1.2Nd–0.5Zr alloy under high temperature and high strain rates

Local deformation of Mg–7Gd–5Y–1.2Nd–0.5Zr magnesium alloy under high speed impact along extrusion direction

Effect of Twin and Grain Size Strengthening on Tensile Properties of a Multi-Directionally Impact Forged Mg–Gd–Y Alloy

Deformation Behavior Characterized by Reticular Shear Bands and Long Chain Twins in Mg-Gd-Nd(-Zn)-Zr Alloys

An Investigation of Slip and Twinning Behavior of a Zirconium Alloy During Plastic Deformation Based on In-Situ SEM-EBSD

Dynamic mechanical response and deformation-induced co-axial nanocrystalline grains facilitating crack formation in magnesium-yttrium alloy

Deformed Microstructure Evolution in AM60B Mg Alloy under Hypervelocity Impact at a Velocity of 5 Km S−1

Microstructure Evolution and Mechanical Properties of an Mg–Gd Alloy Subjected to Surface Mechanical Attrition Treatment

The high-temperature deformation and microstructural evolution mechanism of Mg-Gd-Y-Zn-Zr alloy formed by CMT arc additive forming

{10–12} Twinning Relationship in Mg-Gd-Y(-Sn)-Zr Alloys under Uniaxial Compression at Room Temperature

The Effect of Basal Dislocation on 112¯1 Twin Boundary Evolution in a Mg-Gd-Y-Zr Alloy