Abstract:A high-performance and cost-effective NO2 gas sensor operating at room temperature was realized from synthesized SnO2 nanospheres functionalized with Pd nanoparticles and rGO nanosheets (Pd-SnO2/rGO) by a facile one-step hydrothermal route. The as-synthesized materials were characterized by SEM, TEM, XRD, Raman, XPS, TGA and BET techniques. The Pd-SnO2/rGO composites have unique porous structure, large specific surface area and good thermal stability, as well as abundant oxygen vacancies on material surface. Importantly, the obtained gas-sensing results indicate that the optimal response of the Pd-SnO2/rGO sensor to 100 ppm NO2 gas at room temperature is 7.92 with the response/recovery times of 56.9/22.1 s, and the response/recovery times to 10 ppm NO2 gas are 54.3/24.2 s with the theoretical detection limit of 37.8 ppb, ensuring the real-time detection at relative low concentration of NO2 gas. The Pd-SnO2/rGO sensor performs better than other sensors (including SnO2, Pd-SnO2 and SnO2/rGO sensors) in response and response/recovery times. Besides, our sensor exhibits excellent repeatability, high selectivity for NO2 gas relative to other gases and long-term stability. The enhanced performance of the Pd-SnO2/rGO sensor to trace NO2 gas may benefit from the unique porous structure and large specific surface area, which can provide rich active centers for redox reaction. Also, hybrid heterostructure between SnO2 and rGO can provide more channels for electron transfer, and thus increase the free electron. Catalytic effects of Pd nanoparticles help to produce more oxygen vacancies and chemisorbed oxygen for accelerating the process in redox reaction. It is speculated that our work will provide a superior strategy for realizing ppb-level NO2 gas sensor at room temperature.

Room Temperature NO2-sensing Properties of Porous Silicon/tungsten Oxide Nanorods Composite

WO3 Nanosheet/W18O49 Nanowire Composites for NO2 Sensing

Two-dimensional Cd-doped Porous Co3O4 Nanosheets for Enhanced Room-Temperature NO2 Sensing Performance

ZnO Nanorod/porous Silicon Nanowire Hybrid Structures As Highly-Sensitive NO2 Gas Sensors at Room Temperature

DFT and experimental interpretations of silicon-based room-temperature NO 2 sensors improving humidity independence

Porous Indium Oxide Nanotubes: Layer-by-Layer Assembly on Carbon-Nanotube Templates and Application for Room-Temperature NH3 Gas Sensors

Ultrahigh Sensitive NO2 Gas Sensor Based on WO3 Nanorods

Evaluation of postural steadiness in below-knee amputees when wearing different prosthetic feet during various sensory conditions using the Biodex® Stability System

Confined Formation of Ultrathin ZnO Nanorods/Reduced Graphene Oxide Mesoporous Nanocomposites for High-Performance Room-Temperature NO 2 Sensors.

Highly sensitive NO2 sensor based on mesoporous ZrO2–WO3 nanotubes composite

Enhanced P-Type NO2-sensing Properties of ZnO Nanowires Utilizing CNTs Electrode

NO<sub>2</sub> Gas Sensing Characters of Polycrystaline ZnO Nanorods

Highly enhanced response of MoS2/porous silicon nanowire heterojunctions to NO2 at room temperature

In-situ grown hydrated tungsten oxide nanosheets for low temperature ppb-level NO2 detection with alleviated humidity interference

Plate-like p-n heterogeneous NiO/WO₃ nanocomposites for high performance room temperature NO₂ sensors

Highly sensitive room-temperture NO2 gas sensor based on Bi2S3 nanorods

Synergistic Effect of Electron Scattering and Space Charge Transfer Enabled Unprecedented Room Temperature NO2 Sensing Response of SnO2

response of MoS 2 / porous silicon nanowire heterojunctions to NO 2 at room temperature †

Self-heated WO3 nanowires for selective and sensitive detection of NO2 gas at room temperature

Employing Thermal Oxidation and Through-Silicon Via Technologies in CuO-Based Sensors for Room-Temperature NO2 Detection

A room-temperature chemiresistive NO2 sensor based on one-step synthesized SnO2 nanospheres functionalized with Pd nanoparticles and rGO nanosheets