Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Ultrahigh Sensitive NO2 Gas Sensor Based on WO3 Nanorods

WO3 Nanosheet/W18O49 Nanowire Composites for NO2 Sensing

Nanowires-assembled WO3 nanomesh for fast detection of ppb-level NO2 at low temperature

Self-heated WO3 nanowires for selective and sensitive detection of NO2 gas at room temperature

Au-WO 3 Nanowire-Based Electrodes for NO 2 Sensing

NO<sub>2</sub> Gas Sensing Characters of Polycrystaline ZnO Nanorods

Conductometric NO2 Gas Sensors Based on MOF-derived Porous ZnO Nanoparticles

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Au-decorated WO3-based sensor for chemiresistive detection of NO2 at 80 °C

Ultrasensitive and Highly Selective Gas Sensors Using Three-Dimensional Tungsten Oxide Nanowire Networks

Highly sensitive NO2 sensor based on mesoporous ZrO2–WO3 nanotubes composite

Ultrasensitive Ppb-Level NO2 Gas Sensor Based on WO3 Hollow Nanosphers Doped with Fe

Excellent NO2 gas sensor based on the oxygen inhibiting effect of Ni3+-doped WO3

Tailored formation of WO3-rGO nanohybrids for dependable low temperature NO2 sensing

Effect of au doped WO3 gas sensors for NO2 detection

Black Phosphorus–Tungsten Oxide Sandwich-like Nanostructures for Highly Selective NO2 Detection

Ultrasensitive Room Temperature NO2 Sensors Based on Liquid Phase Exfoliated WSe2 Nanosheets

Mesostructured Pure and Copper-Catalyzed Tungsten Oxide for No2 Detection

WS2 Coating and Au Nanoparticle Decoration of ZnO Nanorods for Improving Light-Activated NO2 Sensing

A room-temperature NO<sub>2</sub> gas sensor based on CuO nanoflakes modified with rGO nanosheets

Vertically aligned MoS 2 /ZnO nanowires nanostructures with highly enhanced NO 2 sensing activities