Abstract:Organic light-emitting diode (OLED) has attracted considerable attention due to their unique image quality and market potentials in display field. Efficient blue, green and red emitters with excellent color purity are required for full-color display application, so far great improvements have been achieved for the life time and efficiency of the red and green materials. However, the blue emitting material is still a barrier to commercial applications of OLEDs.Using vacuum thermal evaporation method, blue OLEDs were fabricated by inserting a bathocuproine (BCP) as hole blocking layer (HBL) into conventional double layer (DL) device at the interface of N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine (NPB)/8-hydroxyquinoline aluminum (Alq3). Device structure is indium tin oxide (ITO)/NPB/BCP/Alq/Mg∶Ag, where NPB acts as both hole transporting layer (HTL) and emitting layer (EML), and Alq3 as electron transport layer (ETL). The active emissive area of each device defined by the overlap of ITO and Mg∶Ag was 4 mm×4 mm. Measurements of luminance-voltage (L-V) and current density-voltage (J-V) characteristics were carried out with a Keithley 4200 Semiconductor Characterization System, photoluminescence (PL) and electroluminescence (EL) spectra were measured with an OPT-2000 system. The luminance-voltage and current density-voltage characteristics of devices were investigated, and dif-ferences between their performances were discussed. The results demonstrate that the maximum luminance and luminance efficiency of the BCP device are 2 900 cd/m2 and 0.55 lm/W, respectively. The peak of electroluminescence (EL) spectrum locates at 445 nm and the Commissions Internationale d′Eclairage (CIE) coordinates are (x=0.16, y=0.09), which are independent on the variation of bias voltage. Energy level diagrams were employed to analyze the diversity of device performance with different structures. We find that the high EL performance of the BCP device is attributed to better balance of carriers in the NPB layer by inserting BCP as hole blocking layer (HBL). Optimization of device structure and performance, via adjusting thickness of organic layers, is under investigation.

Efficient Blue Organic Light-Emitting Device Based on N, N′-di(naphth-2-yl)-N, N′-diphenyl-benzidine with an Exciton-Confining Structure

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

Improved Efficiency in Blue Phosphorescent Organic Light‐Emitting Devices Using Host Materials of Lower Triplet Energy Than the Phosphorescent Blue Emitter

An Efficient Blue Organic Light Emitting Structure

Efficient White Organic Light-Emitting Devices Using 2,5-Diphenyl-1, 4-Distyrylbenzene with Two Trans-Double Bonds As Blue Emitter

Efficient Blue Organic Light-Emitting Devices Based on Oligo(Phenylenevinylene)

Efficient Deep-Blue Non-Doped Organic Light-Emitting Diode with Improved Roll-off of Efficiency Based on Hybrid Local and Charge-Transfer Excited State

Efficient Organic Blue Fluorescent Light-Emitting Devices with Improved Carriers' Balance on Emitter Molecules by Constructing Supplementary Light-Emitting Layer

Achieving Ultra-High Efficiency by Tuning Hole Transport and Carrier Balance in Fluorescent Blue Organic Light-Emitting Diode with Extremely Simple Structure

Fabrication and Characterization of Blue Organic Light-emitting Diodes Based on N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine

Fabrication and Spectra Characteristics of High Efficiency White Organic Light-Emitting Diodes with Single Emitting Layer

Efficient bright white organic light-emitting diode based on non-doped ultrathin 5,6,11,12-tetraphenylnaphthacene layer

High-efficiency Blue-Emitting Organic Light-Emitting Devices with 4, 4′, 4″-Tris(n-carbazolyl)-triphenylamine As the Hole/exciton-Blocking Layer

Highly Efficient Non-Doped Organic Light Emitting Diodes Based on Phenanthreneimidazole Derivatives with Hot Exciton Mechanism

A novel bipolar D–π–A type phenanthroimidazole/carbazole hybrid material for high efficiency nondoped deep-blue organic light-emitting diodes with NTSC CIEy and low efficiency roll-off

High efficiency and color saturated blue electroluminescence by using 4,4′-bis[N-(1-naphthyl)-N-phenylamino]biphenyl as the thinner host and hole-transporter

Highly-efficient Blue Electroluminescence Based on Two Emitter Isomers

Highly Efficient Blue Fluorescent OLEDs with Doped Double Emitting Layers Based on P-N Heterojunctions

High Efficiency Deep-Blue Organic Light-Emitting Diode with A Blue Dye in Low-Polarity Host

Efficient deep-blue organic light-emitting diodes with low driving voltage and high color purity

Pyrene‐Based Emitters with Ultrafast Upper‐Level Triplet–Singlet Intersystem Crossing for High‐Efficiency, Low Roll‐Off Blue Organic Light‐Emitting Diode