Abstract:In this work, we quantify field emission properties of cathodes made from carbon nanotube (CNT) fibers. The cathodes were arranged in different configurations to determine the effect of cathode geometry on the emission properties. Various geometries were investigated including: 1) flat cut fiber tip, 2) folded fiber, 3) looped fiber and 4) and fibers wound around a cylinder. We employ a custom field emission microscope to quantify I-V characteristics in combination with laterally-resolved field-dependent electron emission area. Additionally we look at the very early emission stages, first when a CNT fiber is turned on for the first time which is then followed by multiple ramp-up/down. Upon the first turn on, all fibers demonstrated limited and discrete emission area. During ramping runs, all CNT fibers underwent multiple (minor and/or major) breakdowns which improved emission properties in that turn-on field decreased, field enhancement factor and emission area both increased. It is proposed that breakdowns are responsible for removing initially undesirable emission sites caused by stray fibers higher than average. This initial breakdown process gives way to a larger emission area that is created when the CNT fiber sub components unfold and align with the electric field. Our results form the basis for careful evaluation of CNT fiber cathodes for dc or low frequency pulsed power systems in which large uniform area emission is required, or for narrow beam high frequency applications in which high brightness is a must.

A High-Luminescence Fringelike Field Emission from Screen-Printed Carbon Nanotube and Zinc Oxide Composite Film

Stable, Self-Ballasting Field Emission from Zinc Oxide Nanowires Grown on an Array of Vertically Aligned Carbon Nanofibers

All carbon nanotube based flexible field emission devices prepared through a film transfer method

Enhanced Field-Emission Performance from Carbon Nanotube Emitters on Nickel Foam Cathodes

Outstanding Field Emission Properties Of Wet-Processed Titanium Dioxide Coated Carbon Nanotube Based Field Emission Devices

Field emission from Nanocomposite Carbon

Achieving Uniform Field Emission from Carbon Nanotube Composite Cold Cathode with Different Carbon Nanotube Contents: Effects of Conductance and Plasma Treatment

Lateral Field Emitters Fabricated Using Carbon Nanotubes

Field emission from a new form of thin film amorphous carbon having nanoparticle inclusions and carbon nanotubes

A New Mechanism Responsible for the Enhancement of Local Electric Field on the Surface of Emitting Carbon Nanotubes

Carbon Nanotubes - New Material Applied to Field Emission Display

Enhanced Field Emission from Carbon Nanotubes by Electroplating of Silver Nanoparticles

The Enhanced Field-Emission Properties of Screen-Printed Single-Wall Carbon-Nanotube Film by Electrostatic Field

Electrochemical Route to the Preparation of Highly Dispersed Composites of ZnO/carbon Nanotubes with Significantly Enhanced Electrochemiluminescence from ZnO

Field Emission From Short And Stubby Vertically Aligned Carbon Nanotubes

Field emission from combined structures of carbon nanotubes and carbon nanofibers

Improvement of the Field Emission from Screen Printed Carbon Nanotube Cold Cathode by Applying Electrical Field

Experimental and theoretical study on field emission properties of zinc oxide nanoparticles decorated carbon nanotubes

Field emission microscopy of carbon nanotube fibers: evaluating and interpreting spatial emission

A Comparative Study of Field Emission Properties of Carbon Nanotube Films Prepared by Vacuum Filtration and Screen-Printing

Mechanical Fabrication of Carbon Nanotube Films and Their Field-Emission Properties