Abstract:A high cycle fatigue life prediction model based on continuum damage mechanics, crystal plas-ticity and critical distance theory is developed. A novel damage evolution law for anisotropic Ni-based single crystal materials built on continuum damage mechanics is proposed. The crystal plasticity framework was introduced to take into account the particular characteristics of high cycle fatigue. The critical distance theory was innovatively applied to the structure of film cooling holes to predict the lifetime for materials under a multiaxial stress state. High cycle fatigue tests considering drilling technology, stress ratio and creep time were performed using Ni-based single crystal superalloy plates with film cooling holes. The constitutive equations were implemented into a finite element framework to simulate the high cycle fatigue properties of Ni-based single crystal superalloys, and the results of numerical calculations were compared with experimental observations. It was demonstrated that the constitutive formulations proposed in the present study can be used to model the mechanical behavior of Ni-based single crystal superalloys under a multiaxial stress state. The life prediction errors are found to be within the factor-of-three scatter band. The fatigue life of the specimen with ultrafast laser drilled film cooling holes is larger than that with electrostream machined film cooling holes under the same test conditions. The fatigue strength of the specimen with film cooling holes at a stress ratio R = 0.95 is higher than that at a stress ratio R =-1. The life of the specimen with film cooling holes is found to decrease with increasing creep time before high cycle fatigue. The gamma/gamma'-microstructure evolution in the speci-mens with film cooling holes is related to the kinetics of the stress redistribution during the fa-tigue process. A minimum stress level is essential for rafting to occur. The damage distribution for the plate model is in line with the crack initiation location and propagation region of the specimen.

Unified Modeling of High Temperature Deformations of a Ni-based Polycrystalline Wrought Superalloy under Tension-Compression, Cyclic, Creep and Creep-Fatigue Loadings

Creep Properties and Life Model of Anisotropic Ni-based Single Crystal Superalloys over a Wide Temperature Range

A modified damage-coupled viscoplastic constitutive model for capturing the asymmetric behavior of a nickel-based superalloy under wide creep-fatigue loadings

A Unified Creep Life Prediction Method and Fracture Mechanism of High-Temperature Alloys under Multiaxial Stress

Properties and Simulation of Nonisothermal Creep of a Directionally Solidified Superalloy

Creep Residual Life Prediction of a Nickel-Based Single Crystal Superalloy Based on Microstructure Evolution

Based on Damage Caused by Microstructure Evolution During Long-Term Thermal Exposure to Analyze and Predict Creep Behavior of Ni-based Single Crystal Superalloy

High Temperature Fatigue and Creep-Fatigue Behaviors in a Ni-based Superalloy: Damage Mechanisms and Life Assessment

High Cycle Fatigue Life Prediction Model Based on Crystal Plasticity and Continuum Damage Mechanics for Ni-based Single Crystal Superalloys under a Multiaxial Stress State

Analysis and Prediction of Non-Isothermal Creep Behavior in Ni-based Single Crystal Superalloy

Constitutive modeling and failure mechanisms of anisotropic tensile and creep behaviors of nickel-base directionally solidified superalloy

A Non-Isothermal Creep Fracture Prediction Method of DS Superalloy Considering Microstructural Damage

Constitutive Modeling of a Directionally Solidified Nickel-Based Superalloy DZ125 Subjected to Thermal Mechanical Creep Fatigue Loadings

Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy

Cycle-dependent creep-fatigue deformation and life predictions in a nickel-based superalloy at elevated temperature

MICROSTRUCTURE EVOLUTION MECHANISM BASED CRYSTAL-PLASTICITY CONSTITUTIVE MODEL FOR NICKEL-BASED SUPERALLOY AND ITS FINITE ELEMENT SIMULATION

High Temperature Mechanical Constitutive Modeling of a High-Nb TiAl Alloy

Creep-fatigue Life Prediction and Interaction Diagram in Nickel-Based GH4169 Superalloy at 650 °C Based on Cycle-by-cycle Concept

A Concise Binomial Model for Nonlinear Creep-Fatigue Crack Growth Behavior at Elevated Temperatures

Continuum Damage Mechanism-Based Life Prediction for Ni-Based Superalloy under Complex Loadings

Cyclic Plasticity Modeling of Nickel-Based Superalloy Inconel 718 under Multi-Axial Thermo-Mechanical Fatigue Loading Conditions