Abstract:Nanomaterials and nanostructures with multi-functional properties found widespread applications such as electronics, optics, and coatings that can be fabricated using Atomic Layer Deposition (ALD). ALD is a vapor phase deposition technique to generate thin films of metals and metal oxides on a substrate. In this process, a precursor, which often comprises of organic functional groups that surround the depositing metal, chemisorbs on the substrate or reacts with the surface sites and with each other. Precursor chemisorption on the substrate leads ALD to be a self-limiting process. Thus, the precursor(s) should be chosen in a way to enhance deposition based on the ALD conditions. For a given application, it is practically impossible to carry out a large number of experiments using numerous precursors with varied deposition conditions to find the one that maximizes the growth rate in ALD. In addition, only existing precursors can be tested experimentally. The overall objective of this work is to develop a computational tool for the in-silico design of precursor materials using adsorbate solid solution theory (ASST). In the first part of this paper, we apply the ASST to derive properties of the functional groups present in the precursor using a new Group Contribution Method (GCM). The GCM is successfully derived and compared with the experimental data from ALD. The method shows good agreement and is useful for the design of novel materials. In the second part of this paper, using the thermodynamic properties as obtained from GCM, we develop a computer-aided molecular design (CAMD) framework for the optimal design of novel precursor materials with enhanced deposition properties for the ALD of metal oxides and metals. The metaheuristic efficient ant colony optimization algorithm (EACO) developed in-house is used for both parts. CAMD is a combinatorial optimization methodology, where molecules with optimal desired properties are generated from functional groups. The precursor selection optimization problem is posed as a mixed integer nonlinear programming problem, which is solved using EACO. The ALD growth kinetics is used as an objective of optimization and a solution is validated with thermodynamic constraints. Along with the number of groups, the temperature is also included in the optimization framework as decision variables. 41 novel titanium precursor molecular structures for ALD are generated with growth rates ranging from 1.23 Å/cycle to as high as 1.65 Å/cycle. Thus, these precursors have shown growth rates higher than the known titanium precursors. ALD growth rate is found to be a function of the combination of the precursor functional groups as well as temperature with a complex correlation among them.

Mechanistic Modeling Study on Process Optimization and Precursor Utilization with Atmospheric Spatial Atomic Layer Deposition

Atomic Layer Deposition Process Optimization by Computational Fluid Dynamics

Enhancing control in spatial atomic layer deposition: Insights into precursor diffusion, geometric parameters, and CVD mitigation strategies

Mechanistic modeling study of atomic layer deposition process optimization in a fluidized bed reactor

Transient Analysis and Process Optimization of the Spatial Atomic Layer Deposition Using the Dynamic Mesh Method

Computational Fluid Dynamics Modeling of Spatial Atomic Layer Deposition on Microgroove Substrates

Mechatronic Spatial Atomic Layer Deposition for Closed‐Loop and Customizable Process Control

Optimization of Spatially-Separated Atomic Layer Deposition Conditions

Study of Ultrasonic Vibration-Assisted Particle Atomic Layer Deposition Process Via the Cfd-Ddpm Simulation

Numerical Simulation of Spatial Atomic Layer Deposition on Moving Substrates with Microgrooves and Porous Structures

Computational Modeling of Physical Surface Reactions of Precursors in Atomic Layer Deposition by Monte Carlo Simulations on a Home Desktop Computer

Can We Rationally Design and Operate Spatial Atomic Layer Deposition Systems for Steering the Growth Regime of Thin Films?

Modeling ALD Surface Reaction and Process Dynamics using Absolute Reaction Rate Theory

Modeling scale-up of particle coating by atomic layer deposition

Optimal design of novel precursor materials for the atomic layer deposition using computer-aided molecular design

Modeling the impact of incomplete conformality during atomic layer processing

Model Based Prediction of Nanostructured Thin Film Morphology in an Aerosol Chemical Vapor Deposition Process

Advanced Process Control for Salvianolic Acid A Conversion Reaction Based on Data-Driven and Mechanism-Driven Model

Analytic expressions for atomic layer deposition: Coverage, throughput, and materials utilization in cross-flow, particle coating, and spatial atomic layer deposition

Dynamic Modeling of Micro- and Nano-Sized Particles Impinging on the Substrate During Suspension Plasma Spraying

Theoretical design and computational screening of precursors for atomic layer deposition