Abstract:The adsorption behavior of water and ions at the surfaces of porous calcium-silicate-hydrate (C-S-H) gels affects the durability of concrete. This paper presents the results of molecular dynamics simulations performed using the Clay Force Field that were conducted to investigate the local structure, adsorption behavior, and dynamic properties of water and ions in the pores of C-S-H gels. A realistic C-S-H gel channel model was constructed and simulated with three mixed salt solutions (NaCl + Na2SO4, NaCl + Na2CO3, and Na2SO4 + Na2CO3) in the pores. The realistic C-S-H gel surface was found to be hydrophilic, causing water molecules to adopt an orderly arrangement near the substrate surface. This hydrophilicity is due to defective silicon chains in the substrate that provide large numbers of hydrogen bonding sites for surface water molecules. Additionally, calcium atoms near the surface attract water molecules to form hydration layers. The adsorption of cations near the substrate correlated negatively with the strengths of the ionic clusters formed by the dissolved anions and cations. As a result, the adsorption of sodium ion was strongest for the NaCl + Na2SO4 solution and weakest for the Na2SO4 + Na2CO3 solution. There were also clear differences in the adsorption behaviors of the anions. Chloride adsorption was mainly driven by ion pairing with calcium atoms near the surface, while sulfate adsorption was mainly due to ion pairing with surface-adsorbed sodium ions. Conversely, carbonate ions exhibited weaker surface adsorption because of their tendency to form ionic clusters in solution. These insights into the adsorption behaviors of common ions near a realistic C-S-H gel surface will be useful in future efforts to develop modified cement-based materials with improved properties.

Adsorption Behaviour of Sulfate in Early Cement Hydration

The influence of low calcium sulfate contents on early calcium aluminate cement–calcite hydration kinetics and pore solution chemistry

Calcium Leaching from Cement Hydrates Exposed to Sodium Sulfate Solutions

Influence of Sulfates on Formation of Ettringite during Early C3A Hydration

Interaction between zeolite and sulfate, and its influences on cement hydration

The influence of sulfate addition on hydration kinetics and C-S-H morphology of C3S and C3S/C3A systems

Impact of temperature, pH value and multiple ions on the physisorption of chloride ion on C-S-H gel surface

Transport Properties of Sulfate and Chloride Ions Confined Between Calcium Silicate Hydrate Surfaces: A Molecular Dynamics Study

Citrate sorption on cement hydrates

Study on Adsorption Properties of Calcined Mg–Al Hydrotalcite for Sulfate Ion and Chloride Ion in Cement Paste

Analysis of Sulfate Substance Penetration into the Surface Area of Hardened Cement Mortar and Its Reaction Products

Molecular dynamics simulation of coupled water and ion adsorption in the nano-pores of a realistic calcium-silicate-hydrate gel

Understanding Cement Hydration of Cemented Paste Backfill: DFT Study of Water Adsorption on Tricalcium Silicate (111) Surface

Preparation of C-S-H Gels by Mechanochemistry and Its Influences on Properties of Super-Retarded Cement-Based Materials with Sucrose

Carbonation behavior of calcium silicate hydrate (C-S-H): Its potential for CO2 capture

Effects of pH on the nano/micro structure of calcium silicate hydrate (C-S-H) under sulfate attack

Early age hydration of model slag cement: Interaction among C3S, gypsum and slag with different Al2O3 contents

Effect of LDH on the dissolution and adsorption behaviors of sulfate in Portland cement early hydration process

Study on the Factors Influencing the Adsorption Mechanism of CSH Gel for Chloride Ions

Effect of Gypsum on the Early Hydration of Cubic and Na-Doped Orthorhombic Tricalcium Aluminate