Abstract:H2/O2 chemistries are of great crucial for all hydrocarbon and syngas oxidations. Recent study showed that presence of residual H-atom in shock tubes may heavily influences experimental determination of ignition delay times in H2/O2 mixtures. Although numerous studies of hydrogen ignition delay times were reported, none of them discussed the residual H-atom in their studies which may impact the accuracy of their measurements. In this study, a systematic measurement related to the ignition delay times were conducted for H2/O2 mixtures diluted with argon over the temperatures from 850 K to 1500 K, the pressures from 1.2 to 16.0 atm, and the equivalence ratios of 0.5, 1.0 and 2.0. Special attentions were paid to eliminate the influence of residual H-atom on ignition delay time and the calculation showed that the residual H-atom in current shock tube shows no obvious effect on ignition delay time, which guarantees the present data more convincing. The measurements showed that the hydrogen mixtures have different global activation energies under different pressures. Thus, correlations were derived under different pressures based on all experimental data, which fit fairly well with the experimental data. A couple of detailed kinetic models from literature were validated against the present experimental results. The result shows that the mechanism of Kéromnès-2013 yields the best agreement with data from shock tube experiments at various pressures up to 16 atm, while Davis-2005, GRI 3.0, SanDiego-2011 and Li-2004 mechanisms present significant poor predictions at higher pressures. This investigation is contrary to the previous studies. Reaction pathway and sensitivity analysis indicated that reaction R10: H + O2 (+M) <=> HO2 (+M) is of significant important pressure-dependent reaction in controlling of hydrogen oxidation. It is inferred that significant differences of their rate constants among various mechanisms induce the difference of performance on hydrogen ignition predictions.

Ignition Delay-Time Behind Reflected Shock Waves of Small Hydrocarbons–nitrous Oxide(–oxygen) Mixtures

Ignition Delay Time of Small Hydrocarbons-Nitrous Oxide (-Oxygen ) Mixtures

Ignition Delay Time and Chemical Kinetic Study of Methane and Nitrous Oxide Mixtures at High Temperatures

Measurements of the High Temperature Ignition Delay Times and Kinetic Modeling Study on Oxidation of Nitromethane

Experimental and Kinetic Study on Ignition Delay Times of Methane/hydrogen/oxygen/nitrogen Mixtures by Shock Tube

Comparative Study of the Effects of Nitrous Oxide and Oxygen on Ethylene Ignition

An Ignition Delay Time and Chemical Kinetic Study of Ethane Sensitized by Nitrogen Dioxide

Shock Tube Study on Auto-Ignition Characteristics of Kerosene/air Mixtures

Shock Tube Study on Ignition Delay of Hydrogen and Evaluation of Various Kinetic Models

Experimental and Kinetic Study of the Promoting Effect of Nitrogen Dioxide on Ethane Autoignition in a Rapid Compression Machine

Role of O2 on Nitrous Oxide Fuel Blend Ethylene Auto-Ignition Sensitivity

Ignition Characteristics of Dual-Fuel Methane-N-hexane-oxygen-diluent Mixtures in a Rapid Compression Machine and a Shock Tube

Ignition Delay Time Measurements of Normal Alkanes and Simple Oxygenates

Role of O 2 on nitrous oxide fuel blend ethylene auto-ignition sensitivity

Experimental investigation of auto-ignition of ethylene-nitrous oxide propellants in rapid compression machine

Ignition Delay Times of Ethane under O2/CO2 Atmosphere at Different Pressures by Shock Tube and Simulation Methods

Hydrogen–nitrous Oxide Delay Times: Shock Tube Experimental Study and Kinetic Modelling

Experimental Study of the Ignition of a Stoichiometric Propylene–Oxygen–Argon Mixture Behind a Reflected Shock Wave

Ignition kinetics of nitrocyclohexane behind reflected shock waves in inert and air environments

Ignition delay of lean hydrogen-air mixtures

Ignition Delay Times of Kerosene (Jet-A)/Air Mixtures