Nanosulfonated silica incorporated SPEEK/SPVdF-HFP polymer blend membrane for PEM fuel cell application
P. Martina,R. Gayathri,M. Raja Pugalenthi,Guozhong Cao,Chaofeng Liu,M. Ramesh Prabhu
DOI: https://doi.org/10.1007/s11581-020-03478-9
IF: 2.961
2020-02-15
Ionics
Abstract:<p class="a-plus-plus">Sulfonated silica particles are admixed with sulfonated poly (ether ether ketone) (SPEEK)/sulfonated poly (vinylidene fluoride-co-hexafluoropropylene) (SPVdF-HFP), with various ratios by means of solvent casting. X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), atomic force microscopy (AFM), and energy-dispersive X-ray spectroscopy (EDAX) were employed for characterizing the polymer electrolytes. Physicochemical and electrochemical characterizations such as ion exchange capacity, water uptake, swelling ratio, lambda values, temperature-dependent proton conductivity, and performance for prepared polymer composites are also analyzed. From the XRD and FTIR confirms the phase analysis and complex formation of the prepared polymer electrolytes. For 6 wt% S-SiO<sub class="a-plus-plus">2</sub>, incorporated polymer membrane shows the high water uptake (36.5%), swelling ratio (15.9%), and ion exchange capacity (1.70 meq g<sup class="a-plus-plus">−1</sup>) values compared to the respective samples. The highest proton conductivity value obtained for the 6 wt% S-SiO<sub class="a-plus-plus">2</sub> incorporated polymer membrane of 80 wt% SPEEK-20 wt% SPVdF-HFP is 7.9 × 10<sup class="a-plus-plus">−2</sup> S cm<sup class="a-plus-plus">−1</sup>. The current density and power density value of 354 mA cm<sup class="a-plus-plus">−2</sup> and 110 mW cm<sup class="a-plus-plus">−2</sup> with an OCV of 0.95 V at 90 °C under the 100% RH.</p>
chemistry, physical,physics, condensed matter,electrochemistry