Abstract:This work reports one interesting optical microcavity: self-rolled up optical microcavity with tubular geometry. Several different fabrication processes for the microtubular optical cavities had been reported [1]. Different from transitional fiber-drawing technique [2], the nanomembrane with pre-defined geometries can be bend into a curved structure and forms a three dimensional (3D) tubular structure by predefined strain-engineering via lift-off technology [3, 4]. Our group focus on the research on the optical properties of these self-rolled up optical microcavities [5, 6]. A schematic view of the self-rolled up processes is illustrated in Figure 1 [1]. The nanomembranes released via the lift-off processes from the sacrificial layer on substrate. Then, the freestanding nanomembranes self-rolled up into microtubes and performed as optical microcavities. The typical micro-photoluminescence (μ-PL) spectra of these rolled-up microtubes in various color regions are shown in Figure 2 [5]. Various interesting materials (Figure 2) were used for the fabrication of self-rolled up tubular optical microcavities in difference spectral range [5]. As shown in Figure 3, the μ-PL spectra measured at different positions along the micro-tubes by rolling circular nanomembranes indicates an evident 3D optical confinement. The WGMs shift to lower wavelengths when moving from the middle to the end of the micro-tubular cavity along the z direction. We consider that this interesting phenomenon in WGMs (both emergence of sub-peaks and the shift of modes) should be intimately connected with the geometrical structure of the micro-tubular cavity. Effective surface modification and geometry design will introduce special optical properties in these self-rolled up microcavities [6]. The rolling process has been provides a convenient way to produce a stack of multilayers made from different materials with tunable geometry, demonstrating a new method to prepare optical microdevices. The future of rolled-up microcavities lies in many aspects from fundamental science to practical applications. The corresponding resonance can thus be tuned in terms of wavelength range and Q-factor. Functional materials may also be incorporated to achieve effective coupling between the light and other physical fields, giving birth to special micro devices with good tunability. Meanwhile, rolled-up thin-walled oxide tubular microcavity delivers a new optical component for light coupling and may imply interesting applications in the interaction between light and matter [6]. Considering the on-chip integratability of rolled-up structures, researchers may also be able to produce a sensing device to realize lab-in-a-tube [3].

Fabrication And Optical Properties Of C/Beta-Sic/Si Hybrid Rolled-Up Microtubes

Low Volume Fraction in Situ (ti5si3+ti2c)/ti Hybrid Composites with Network Microstructure Fabricated by Reaction Hot Pressing of Ti–SiC System

Fabrication and microstructure analysis of continuous C fibers reinforced SiC-Cnfs hybrid composite tubes

Optical Properties of Rolled-Up Tubular Microcavities from Shaped Nanomembranes

Blue-emitting Β-Sic Fabricated by Annealing C60 Coupled on Porous Silicon

Microstructural and Photoluminescent Properties of Terbium-Doped SiC Nanotubes Prepared by Sputtering Using Electrospun Polymer Templates

SELF-ROLLED UP TUBULAR OPTICAL MICROCAVITIES

SiOx/Si radial superlattices and microtube optical ring resonators

Fabrication and photoluminescence of bicrystalline SiC nanobelts

Tubular oxide microcavity with high-index-contrast walls: Mie scattering theory and 3D confinement of resonant modes.

Tuning of Optical Resonances in Asymmetric Microtube Cavities

Fabrication and Superconducting Properties of Nano-Sic Doped MgB 2 Tapes

Microstructure Characterization by X-Ray Computed Tomography of C/C-SiC Ceramic Composites Fabricated with Different Carbon Fiber Architectures

Enhanced irradiation-resistance of polymer-derived SiC by incorporation of multiwalled carbon nanotubes

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

Preparation and Luminescence of Amorphous SiC Material and Its Optical Microcavity

In-situ synthesis and microstructural evolution of a SiC reinforced Al-50Si composite exhibiting exceptional thermal properties

Fabrication of (SiC-AlN)/ZrB2 Composite with Nano-Micron Hybrid Microstructure via PCS-Derived Ceramics Route

Growth of carbon nanotubes on silicon carbide fabric as reinforcement for SiC/C composites

Bonding Nature, Structural Optimization, and Energetics studies of SiC Graphitic-Like layer Structures and Single/Double Walled Nanotubes

Enhanced Mechanical/electrical Properties of in Situ Synthesized SiC-TiB2 Ceramic Composites by Reactive Hot-Pressing Sintering