Abstract:Hardening or softening associated with the increase of dislocation density is correlated with strain rate and dislocation density. Taking aluminum as a model material, we investigate the strain rate and dislocation density dependence of the strength and the accompanying hardening or softening effect upon a dislocation increase. This investigation is enabled by employing a newly developed crystal plasticity model, which is validated against the mechanical behaviors in an extremely wide strain rate range, and featured by a parameter-free mobile dislo-cation fraction law based on the exponential distribution of dislocation link lengths and an averaged dislocation velocity model that considers both thermally-activated waiting mechanism and drag-dominated running mechanism. Results show that at different strain rates, the material strength varies with a universal feature that it first softens as the dislocation density increases from a sufficiently low initial value, and then hardens after reaching the minimum strength, where the critical dislocation density separating the softening from hardening regimes increases with the strain rate. Microscopically, the strength dependence on dislocation density and strain rate originates from their influence on the two competing effects of a dislocation increase, where the hardening effect comes from the higher resistance to dislocation slip by increased forest dislocations while the softening effect comes from the larger quantity of mobile dislocations. These two competing effects are quantitatively evaluated by the crystal plasticity model and are further cast into the competition between the partial derivatives of normalized dislocation velocity and of normalized mobile dislocation density, and the governing equation for the critical dislocation density is thus furnished by balancing these two competing effects. Further, a complete map in the entire space of strain rate and dislocation density (epsilon, rho) is constructed for the zones of dislocation hardening or softening, where the zone-boundary curve for critical dislocation density exhibits a two-stage character and it agrees well with the available experimental data. Such a map is expected to help predict the trend for strength evolution under different serving conditions and also guide the material design according to the requirements for strength variation in service.

Contribution of Mixed Dislocations to the Acoustic Nonlinearity in Plastically Deformed Materials

Effect of Mixed Dislocations on Nonlinear Acoustic Responses in Plastic Deformation Materials

A General Model for Dislocation Contribution to Acoustic Nonlinearity

Acoustic Softening and Residual Hardening in Aluminum: Modeling and Experiments

Modeling of Ultrasonic Nonlinearities for Dislocation Evolution in Plastically Deformed Materials: Simulation and Experimental Validation.

Dislocation Characterization in Cold Rolled Stainless Steel Using Nonlinear Ultrasonic Techniques: A Comprehensive Model

Contribution of Dislocation Evolution to Acoustic Nonlinearity in Plastically Damaged Materials

Influence of Microstructure and Strain Hardening Rate on Acoustic Nonlinearity Parameter in Stainless Steel 316L during Tensile Loading

Effect Of Precipitate-Dislocation Interactions On Generation Of Nonlinear Lamb Waves In Creep-Damaged Metallic Alloys

Nonlinear acoustic characterization of heterogeneous plasticity in bent aluminium samples

Experimental and Numerical Studies of Nonlinear Ultrasonic Responses on Plastic Deformation in Weld Joints

Effect of plastic deformation on nonlinear ultrasonic response of austenitic stainless steel

An energy based modeling for the acoustic softening effect on the Hall-Petch behavior of pure titanium in ultrasonic vibration assisted micro-tension

Evidence for contributions of lack-of-fusion defects and dislocations to acoustic nonlinearity and loss in additively manufactured aluminum

Effects of Cyclic and Monotonic Deformations on Nonlinear Ultrasonic Response of Austenitic Stainless Steel: A Comparative Study

Acoustomechanics of Semicrystalline Polymers

Assessment of Material Dislocation Damage by Nonlinear Ultrasound

The inhomogeneity of plastic deformation in ductile single crystals

Revealing the interface-mediated dislocation behavior and its role in delocalizing strain band in laminated aluminum

Strain-rate dependent crystal plasticity model and aluminum softening/ hardening transition

Evaluation of the Localized Plasticity Using the Mixing of Counter-Propagating Lamb Waves