Abstract:Radar systems are a type of sensor that detects radio signals reflected from objects located a long distance from transmitters. For covering a longer range and a higher resolution in the operation of a radar, a high-frequency band and an array antenna are measures to take. Given a limited size to the antenna aperture in the front end of the radar, the choice of a millimeter-wave band leads to a denser layout for the array antenna and a higher antenna gain. Millimeter-wave signals tend to become attenuated faster by a larger loss of the covering material like the radome, implying this disadvantage offsets the advantage of high antenna directivity, compared to the C-band and X-band ones. As the radome is essential to the radar system to protect the array antenna from rain and dust, a metamaterial surface in the layer is suggested to meet multiple objectives. Firstly, the proposed electromagnetic structure is the protection layer for the source of radiation. Secondly, the metasurface does not disturb the millimeter-wave signal and makes its way through the cover layer to the air. This electromagnetically transparent surface transforms the phase distribution of the incident wave into the equal phase in the transmitted wave, resulting in an increased antenna gain. This is fabricated and assembled with the array antenna held in a 3D-printed jig with harnessing accessories. It is examined in view of S21 as the transfer coefficient between two ports of the VNA, having the antenna alone and with the metasurface. Additionally, the far-field test comes next to check the validity of the suggested structure and design. The bench test shows around a 7 dB increase in the transfer coefficient, and the anechoic chamber field test gives about a 5 dB improvement in antenna gain for a 24-band GHz array antenna.

Surface Wave Suppression in Antenna Systems Using Magnetic Metamaterial

Broadband Metamaterial Absorber with an In-Band Metasurface Function.

Low frequency absorption properties of a thin metamaterial absorber with cross-array on the surface of a magnetic substrate

The Research of High-Directive Anisotropic Magnetic Metamaterial Antenna Loaded with Frequency-Selective Surface

Metasurface: Enhancing Gain of Antenna and Energy Harvesting System Design

Method for Surface-Waves Suppression in Millimeter-Wave PUMA

Electromagnetic Interferences Susceptibility Analysis for a Metasurface‐modified Wireless Power Transfer System

Magnetic-control Multifunctional Acoustic Metasurface for Reflected Wave Manipulation at Deep Subwavelength Scale

Design of Electromagnetic Transparent Antennas Based on Drude Metasurface for High-Band Compatibility

Enhancing Isolation of Antenna Arrays by Simultaneously Blocking and Guiding Magnetic Field Lines Using Magnetic Metamaterials

High Directive Antenna Using Quasi-Periodic Planar Metamaterial Substrates

Decoupling Technique of Patch Antenna Arrays with Shared Substrate by Suppressing Near-Field Magnetic Coupling Using Magnetic Metamaterials

Controlling Electromagnetic Wave Based on Magnetic Metamaterials

Unidirectionally Molding Electromagnetic Waves with Magnetic Metamaterials and Metasurfaces

Suppressing Inside-Substrate Near-Field Magnetic Coupling Using Si-Srrs for the Patch Antenna Arrays

Improvement of Surface Waves Attenuation Performance with A Magnetic Thin Film Loading

Effective Application of Magnetic Material Based on Metamaterial Absorber

A Metamaterial Surface Avoiding Loss from the Radome for a Millimeter-Wave Signal-Sensing Array Antenna

Metasurface Antenna with Ultra-wideband RCS Reduction

A Metasurface Superstrate for Mutual Coupling Reduction of Large Antenna Arrays

Tailor the Surface-Wave Properties of a Plasmonic Metal by a Metamaterial Capping