Abstract:Broadband electromagnetic vibration energy harvesters (EMVEHs) can effectively convert mechanical energy into electricity from human motions with low and random frequencies. However, such applications require a small device footprint which limits the power density of the energy harvester, making it hard to generate sufficient energy for wearable electronics. Here, we present a design of a nonresonant broadband EMVEH based on a magnet array with alternating magnetic polarities and microfabricated planar coils. To enhance the power output and power density of the EMVEH, we propose a geometric optimization method for determining the coil geometry. First, the magnetic flux density (MFD) distribution and the power output under different types of excitation motions are studied by finite element analysis and numerical simulation, respectively. Based on these results, a design of a stackable microfabricated double-sided planar coil sheet consisting of 10 coil groups is chosen. Through the optimization based on the trade-off between induced voltage and coil resistance, four coil turns in each coil group is determined as the optimal design for maximizing the output power, which proved independent of the excitation conditions. Based on the optimized design, a prototype consisting of 20 layers of coil sheets connected in series on each side is fabricated, occupying only 1.73 cm3. The device is tested to have a wide half-power bandwidth of 8 Hz, a maximum output power of 346.7 mu W, and a maximum power density of 200.4 mu W/cm3 , when connected to a matched load of 69.46 omega under sinusoidal excitations of 2.0 g acceleration. Furthermore, we propose a preliminary optimization methodology to determine the optimal number of stacked coil layers.

Magnetoelectric and Electromagnetic Composite Vibration Energy Harvester for Wireless Sensor Networks

Design Optimization of Microfabricated Coils for Volume-Limited Miniaturized Broadband Electromagnetic Vibration Energy Harvester

A low-frequency vibration energy harvester employing self-biased magnetoelectric composite

An integrated multi-source energy harvester based on vibration and magnetic field energy

A micro-electromagnetic vibration energy harvester with higher power density and wider bandwidth utilizing 3D MEMS coils

Design and Fabrication of A Micro Electromagnetic Vibration Energy Harvester

Design, analysis of broadband vibration energy harvester using magnetoelectric transducer

An electromagnetic vibration energy harvester with compact flexure guide for low frequency applications

Research on Multi-DirectionalPiezoelectric-Electromagnetic CompositeVibration Energy Harvesters

An Electromagnetic-Piezoelectric Hybrid Harvester Based on Magnetic Circuit Switch for Vibration Energy Harvesting

A Bi-Axial and Wideband Vibration Energy Harvester Using Magnetoelectric Transducer

Design and analysis of a 3 D broadband vibration energy harvester based on magnetoelectric transducer

Polyvinylidene Fluoride‐Based Vibration Energy Harvester with Piezoelectric and Electromagnetic Effects

Ultra-Low Frequency Eccentric Pendulum-Based Electromagnetic Vibrational Energy Harvester

Self‐biased Magnetoelectric Composite for Energy Harvesting

Design of a Piezoelectric–electromagnetic Hybrid Vibration Energy Harvester Operating under Ultra-Low Frequency Excitation

Performance enhancement of electromagnetic vibration energy harvesters via bi-stable structure based on MEMS 3D coils

Wideband Vibration Energy Harvester with High Permeability Magnetic Material

High Performance Magnetic Mass‐Enhanced Triboelectric‐Electromagnetic Hybrid Vibration Energy Harvester Enabling Totally Self‐Powered Long‐Distance Wireless Sensing

A nonlinear electromagnetic vibration energy harvester lubricated by magnetic fluid for low-frequency vibration