Abstract:The Raman spectra of synthetic zircon were investigated up to 9.5 GPa and from room temperature to 773 K using reference ruby or gold pressure scales. The pressure and temperature dependence of B1g, ω1008 mode wavenumber of zircon was validated to be represented by a sum of ω1008(T) and ω1008(P) under the investigated conditions. The present results provide robustness of the zircon Raman spectroscopic scale for internally consistent pressure determination at high pressures and high temperatures. Raman spectra of zircon have recently been used as a pressure scale for studies of geological fluids at high temperatures and high pressures using diamond anvil cells (DACs). The zircon scale is advantageous in high chemical stability and the large pressure response of the B1g mode. Despite its excellent applicability, the calibration of the scale has been carried out only in a narrow pressure–temperature range, especially under limited high‐temperature and high‐pressure conditions. In this study, the pressure and temperature dependence of the Raman modes of synthetic zircon was investigated up to 9.5 GPa and from room temperature to 776 K using an externally heated diamond anvil cell. Ruby and gold were used as the reference pressure scales. The Raman shift of the B1g mode for the antisymmetric stretching of the SiO4 structure in zircon showed a linear pressure dependence of 5.48(4) cm−1/GPa up to 8 GPa at room temperature, in agreement with the previous studies. Measurements under high‐pressure and high‐temperature conditions confirmed that the pressure dependence up to 9.5 GPa along the isotherms from 373 to 675 K was consistent with the room‐temperature value; the wavenumbers can be well deduced from the sum of the individual effects of pressure and temperature, obtained at ambient temperature and pressure, respectively. A comparison of the zircon scale with the c‐BN Raman spectroscopic scale confirmed that the pressures determined with these scales were in reasonable agreement. The present results provide a confident use of the zircon Raman spectroscopic scale in a wider pressure–temperature range than previous studies for the internally consistent pressure determination.

Optical Calibration of Pressure Sensors for High Pressures and Temperatures

Fluorescence pressure sensors: Calibration of ruby, Sm2+: SrB4O7, and Sm3+: YAG to 55 GPa and 850 K

Raman Spectra Based Pressure Calibration of the Non-Gauge Sapphire Anvil Cell at High Temperature and High Pressure

Srb4o7:Sm2+: an Optical Sensor Reflecting Non-Hydrostatic Pressure at High-Temperature And/Or High Pressure in A Diamond Anvil Cell

Invited article: High-pressure techniques for condensed matter physics at low temperature

Cubic Boron Nitride As A Primary Calibrant for A High Temperature Pressure Scale

Hydrostaticity of pressure-transmitting media for high pressure infrared spectroscopy

Calibration of the Ruby Pressure Gauge to 800 Kbar under Quasi‐hydrostatic Conditions

Specific Volume Measurements of Cu, Mo, Pd, and Ag and Calibration of the Ruby R1 Fluorescence Pressure Gauge from 0.06 to 1 Mbar

High‐pressure and high‐temperature Raman spectroscopic study of zircon as a pressure scale in hydrothermal DACs

Permanent Densification of Silica Glass for Pressure Calibration Between 9 and 20 GPa at Ambient Temperature

High-Pressure Ruby and Diamond Fluorescence: Observations at 0.21 to 0.55 Terapascal

Determination of the variation of the fluorescence line positions of ruby, strontium tetraborate, alexandrite, and samarium-doped yttrium aluminum garnet with pressure and temperature

Absolute Pressure Measurements and Analysis of Diamonds Subjected to Maximum Static Pressures of 1.3-1.7 Mbar

The Strength of Ruby from X-ray Diffraction under Non-Hydrostatic Compression to 68 GPa

A Critical Evaluation of Pressure Scales at High Temperatures by in Situ X-ray Diffraction Measurements

In situ synchrotron X-ray diffraction with laser-heated diamond anvil cells study of Pt up to 95 GPa and 3150 K

Fluorescence and absorption of Rhodamine 6G solutions as pressure standards for a diamond-anvil cell

Study of Diamond Anvil Cell for In-Situ High-temperature and High-pressure Spectrum

High-pressure Physics: the 1-Megabar Mark on the Ruby R1 Static Pressure Scale.

High-Temperature Fiber Optic Cubic-Zirconia Pressure Sensor