Abstract:(0.85-x)Pb(Mg1/3Nb2/3)O30.10Pb(Fe1/2Nb1/2)O30.05PbZrO3xPbTiO3 [(0.85-x)PMN0.10PFN0.05PZxPT] polycrystalline ceramics with morphotropic phase boundary (MPB) compositions were prepared using the modified columbite precursor method. The phase transitional behaviors, composition-dependent electrical properties, and temperature-dependent piezoelectric properties were investigated, respectively. XRD and Raman spectrum analysis indicated that MPB compositions were located around the region with the PT content of x similar to=similar to 0.300.34, confirmed by their corresponding dielectric, piezoelectric, and electromechanical properties. The composition with x similar to=similar to 0.32 possessed the optimum properties with dielectric permittivity er, tangent loss tan d, piezoelectric coefficient d33, electromechanical coupling coefficient kp, remnant polarization Pr, and coercive field Ec of 3432, 0.017, 626 similar to pC/N, 0.56, 29.90 similar to mu C/cm2, and 7.23 similar to kV/cm, respectively. The phase diagram mapped indicated that this quaternary system possesses the similar MPB region with that of other binary and ternary systems. The quaternary system PMNPFNPZPT possessed more competitive d33, kp, and Tr-t than that of Fe-free ternary 0.59Pb(Mg1/3Nb2/3)O30.05PbZrO30.36PbTiO3 (0.59PMN0.05PZ0.36PT) near MPB, exhibiting comparable Pr, Ec, er, tan d, and Tc. Temperature-dependent field-induced-strain and the as-calculated high field d33 also confirmed higher temperature stability for Fe-contained PMNPFNPZPT.

Investigation Of Bismuth-Based Perovskite System: (1-X)Bi(Ni2/3nb1/3)O-3-Xpbtio(3)

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Structure and Electromechanical Properties in Bi0.5na0.5tio3-Based Lead-Free Piezoceramics with Calculated End-Member Bi(Ni0.5ti0.5)O-3

Effect of Bismuth on the Dielectric and Piezoelectric Properties of Pb(1−x)Bi2x/3(Nb0.92Sn0.0375Ti0.0625)2O6 High-Temperature Piezoelectric Ceramics

Preparation and Characterization on Piezo-/Ferro-electric Properties Of(1-X)(knn+lt)+xbi Ceramics

Preparation and electrical properties of the new lead-free (1 − x )Bi 0.5 Na 0.5 TiO 3 – x Ba(Ni 1/3 Nb 2/3 )O 3 piezoelectric ceramics

High Piezoelectric Performance In A New Bi-Based Perovskite Of (1-X)Bi(Ni1/2hf1/2)O-3-Xpbtio(3)

Preparation and electrical properties of the new lead-free (1 − <i>x</i>)Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>–<i>x</i>Ba(Ni<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub> piezoelectric ceramics

Investigation on structural, dielectric, ferroelectric, and piezoelectric properties of (1 − x)PbTiO3–(x)Bi(Zn2/3Nb1/3)O3 solid solutions

Composition Range of Morphotropic Phase Boundary and Electrical Properties of NBT-BT System

Effect of Bi3+ and Ti4+ Substitution on PbNb2O6 Piezoelectric Ceramics

Properties of (Zn_(1/3)Nb_(2/3))~(4+) substituted BNT system lead-free piezoelectric ceramics

Morphotropic phase boundary and electric properties in (1 − x )Bi 0.5 Na 0.5 TiO 3 – x BaSnO 3 lead-free piezoelectric ceramics

Influence of PNN on the Structure and Electronic Properties of BSPT Ceramics

Dielectric and piezoelectric properties of Pb(Ni1/3Nb2/3)O3–PbTiO3–PbZrO3 ceramics modified with bismuth and zinc substitutions

Phase diagram, temperature stability, and electrical properties of (0.85-x) Pb (Mg 1/3 Nb 2/3) O 3-0.10 Pb (Fe 1/2 Nb 1/2) O 3-0.05 PbZrO 3-x PbTiO 3 system

Phase‐Composition‐Dependent Piezoelectric and Electromechanical Strain Properties in (bi1/2na1/2)tio3–ba(ni1/2nb1/2)o3 Lead‐Free Ceramics

Piezoelectric Ceramics in the Pbsno3-Pb(Mg1/3nb2/3)O-3-Pbtio3 Ternary System

Study of the Electrical Properties of Pb(Zn,Ni) 1/3 Nb 2/3 O 3 –pbtio 3 Ceramics Across the Morphotropic Phase Boundary

High Temperature Piezoelectric Ceramics (1-X)bisco3-xpbtio(3) Near the Morphotropic Phase Boundary (Mpb)

Enhanced Piezoelectric Properties of Tetragonal (bi1/2k1/2)tio3 Lead-Free Ceramics by Substitution of Pure Bi-Based Bi(Mg2/3nb1/3)O-3