Abstract:Half-Heusler thermoelectrics offer the possibility to choose from a variety of non-toxic and earth-abundant elements. TiNiSn is of particular interest and - with its relatively high electrical conductivity and Seebeck coefficient - allows for optimization of its thermoelectric figure of merit, reaching values of up to 1 in heavily-doped and/or phase-segregated systems. In this contribution, we used an energy- and time-efficient process involving solid-state preparation in a commercial microwave oven and a fast consolidation technique, Spark Plasma Sintering, to prepare a series of Ni-rich TiNi1+xSn with small deviations from the half-Heusler composition. Spark Plasma Sintering plays an important role in the process by being a part of the synthesis of the material rather than solely a densification technique. Synchrotron powder X-ray diffraction and microprobe data confirm the presence of a secondary TiNi2Sn full-Heusler phase within the half-Heusler matrix. We observe a clear correlation between the amount of full-Heusler phase and the lattice thermal conductivity of the samples, resulting in decreasing total thermal conductivity with increasing TiNi2Sn fraction. This trend shows that phonons are scattered effectively as a result of the microstructure of the materials with full-Heusler inclusions in the size range of microns to tens of microns. The best performing samples with around 5% of TiNi2Sn phase exhibit maximum figures of merit of almost 0.6 between 750 K and 800 K which is an increase of ca. 35% compared to the zT of the parent compound TiNiSn.

Synthesis And Thermoelectric Properties Of Half-Heusler Alloy Ynibi

Fabrication And Thermoelectric Properties Of Yb-Doped Zrnisn Half-Heusler Alloys

Thermoelectric Performance of Half-Heusler Compounds TiNiSn and TiCoSb

P-type Doping of Hf0.6Zr0.4NiSn Half-Heusler Thermoelectric Materials Prepared by Levitation Melting and Spark Plasma Sintering

Preparation and Thermoelectric Properties of Zr1-xTixNiSn0.975Sb0.025 Half-Heusler Alloys

Effect of Ti Doping on the Thermoelectric Properties of YNiSb Half-Heusler Alloy

Suspension melting preparation of Zr1-xTixNiSn0.975Sb0.025 half-heusler alloy and its thermoelectric properties

Thermoelectric Properties and N - to P -Type Conversion of Co-Doped ZrNiSn-Based Half-Heusler Alloys

High-performance Half-Heusler Thermoelectric Materials Hf1−x ZrxNiSn1−ySby Prepared by Levitation Melting and Spark Plasma Sintering

First-Principles Insights into Thermoelectric Behavior of XNiAs (X = Sc, Y) Half-Heusler Compounds

Effects of Yttrium Doping on the Thermoelectric Properties of Hf0.6Zr0.4NiSn0.98Sb0.02 Half-Heusler Alloys

Half Heusler Alloys for Efficient Thermoelectric Power Conversion

Alloyed triple half-Heuslers: a route toward high-performance thermoelectrics with intrinsically low lattice thermal conductivity

Improving the Thermoelectric Properties of Half-Heusler TiNiSn Through Inclusion of a Second Full-Heusler Phase: Microwave Preparation and Spark Plasma Sintering of TiNi1+xSn

Thermoelectric properties of half-Heusler alloys

High performance half-Heusler thermoelectric materials with refined grains and nanoscale precipitates

Fabrication and Thermoelectric Properties of Fine-Grained TiNiSn Compounds

Improving the thermoelectric performance of double half-Heusler compounds ZrNi(In,Sb)

Impact of Interstitial Ni on the Thermoelectric Properties of the Half-Heusler TiNiSn

Reduced Grain Size and Improved Thermoelectric Properties of Melt Spun (hf,zr)nisn Half-Heusler Alloys

Significant enhancement in thermoelectric properties of half-Heusler compound TiNiSn by grain boundary engineering