Abstract:A quasi-distributed fiber magnetic field sensing system based on frequency-shifted interferometry fiber cavity ringdown (FSI-FCRD) technique is proposed and demonstrated. In this scheme, multiple sensing units are connected in series in a frequency-shifted interferometer, and share one continuous-wave light source, one slow detector and one low-frequency data collector to lower the cost. In each unit, a side-polished single-mode fiber coated with the diluted water-based ferrofluid serves as the sensing element for enhancing sensitivity and mechanical strength. The cavity loss of each unit varies with the change of applied magnetic field, due to the tunable refractive index of the ferrofluid and the evanescent wave effect of the polished fiber. Therefore, the measurement of magnetic field can be realized by monitoring the cavity loss change. A dual-unit FSI-FCRD magnetic field sensing system was experimentally investigated. The cavity losses and locations of the two sensing units about 2500 m apart were synchronously achieved from a spatial domain ringdown signal of the system. The measured cavity loss of each sensing unit exhibited a good linear relationship with the magnetic field over a range of 0 to 250 Oe. The sensitivities were separately 6.7894 × 10−4 and 7.4980 × 10−4 dB/Oe, with the corresponding detection limits of 2.56 and 3.63 Oe. Through repeated measurements, the obtained baseline stabilities of the two units were 0.15% and 0.18%, respectively. By theoretical analysis, the maximum multiplexing number of sensing units can reach 30 over a 15.8-km distance under the same experimental settings. It indicates that multi-unit FSI-FCRD provides an alternative technique with low cost, high sensitivity and high stability for quasi-distributed magnetic field detection in many fields such as smart grids, biomedicine and national defense.

Magnetic field sensing based on fiber loop ring-down spectroscopy and etched fiber interacting with magnetic fluid

Phase Shift Fiber Loop Ring-Down Cavity Integrated SNS Structure for Magnetic Field Sensing

Fiber optic magnetic field sensor based on a magnetic-fluid-induced phase-shift FLRD

Multipoint Magnetic Field Measurement Based on Magnetic Fluid and FSI-FLRD

High-precision Magnetic Field Sensor Based on Phase-Shift Fiber Loop Ring-Down Technique and FBG-magnetostrictive Structure

Magnetic-Ionic-Liquid-Functionalized Photonic Crystal Fiber for Magnetic Field Detection

Magnetic Field Sensor Based on Twisted Fiber and Magnetic Fluid

Highly-sensitive magnetic field sensor based on fiber ring laser

Magnetic field sensing using magnetic-fluid-filled optofluidic ring resonator

Highly Sensitive Current Sensor Based on Fiber Loop Ring-Down Spectroscopy and Bent-Annealed Taper No-Core Fiber Surrounded by Magnetic Fluid

Magnetic Fluid-Filled Optical Fiber Fabry–Pérot Sensor for Magnetic Field Measurement

A novel magnetic field sensor based on the combination use of microfiber knot resonator and magnetic fluid

Magnetic Field Sensor Based on Magnetic-Fluid-Coated Long-Period Fiber Grating

A Magnetic Field Sensor Based on Directional Coupling in a Magnetic Fluid-Filled Photonic Crystal Fiber

Magnetic Field Sensor Based On Fiber Taper Coupler Coated With Magnetic Fluid

Vector Magnetic Field Sensor Based on Coreless D-shaped Fiber and Magnetic Fluid

All Fiber Magnetic Field Sensor with Ferrofluid-filled Tapered Microstructured Optical Fiber Interferometer.

A quasi-distributed fiber magnetic field sensor based on frequency-shifted interferometry fiber cavity ringdown technique

High-Sensitivity and Directional-Identification Fiber Magnetic Field Sensor Via Polarimetric Fiber Ring Laser with a Fiber Faraday Rotator

Highly sensitive magnetic field sensors based on Fe2O3 nanorods grown on the surface of a tapered few mode fiber

Fiber Magnetic Field Sensor With Extended Linear Measuring Range Based on Magneto-Shape Effect