Abstract:Diketopyrrolopyrrole (DPP) is attractive for building conjugated polymers for polymer solar cell (PSC) and organic field effect transistor (OFET). Yet the usual access to DPP conjugated polymers is via donor-acceptor (D-A) two-component polymerization. However, the number of excellent polymers based on the D-A combination is still limited, which promotes researchers to explore new strategy for preparation of novel conjugated polymers and to understand their structure-property relationship. In this work, a DPP-based polymer P1 was first obtained with co-polymerization of DPP (A) and alkoxyl benzene (D). Further, two novel polymers (P2 and P3) were developed via introducing a third electron-deficient monomer X (difluoro-benzothiadiazole or naphthalene diimide) in the polymerization process. P1 - P3 polymers (molecular weight: 3.83 x 10(4), 5.30 x 10(4) and 6.56 x 10(4)) showed good solubility in common organic solvents. Due to the hybridization of the molecular orbitals between their three components (D, A and X), P2 and P3 showed narrower bandgaps (1.26 and 1.27 eV) than P1, and their absorption thus red-shifted up to 1000 nm in comparison to that of D-A polymer P1 (bandgap of 1.50 eV). The introduction of electron-deficient monomers also deepened the highest occupied molecular orbital (HOMO) levels of P2 and P3 to -5.28 and -5.33 eV, which was beneficial to a larger open circuit voltage (V-OC) in PSCs. Moreover, the introduction of the third monomer X altered the film properties of the polymers. It showed that P1 with preference of face-on orientation exhibited a good power conversion efficiency (PCE) in PSCs, while P2 demonstrated an improved hole mobility in OFET due to the preferable edge-on orientation. When blended with [6,6]-phenyl-C-71-butyric acid methyl ester (PC71BM), P1 showed a PCE of 2.56%, with a V-OC of 0.68 V, a short circuit current density (J(SC)) of 5.71 mA cm(-2) and a fill factor (FF) of 0.66, while P2 gave a lower PCE of 1.79%, with a V-OC of 0.71 V, a J(SC) of 3.91 mA cm(-2) and a FF of 0.65. This work provides references for the design of novel conjugated polymers for PSCs and OFETs.

Naphtho[1,2-b:5,6-b′]dithiophene Based Two-Dimensional Conjugated Polymers for Highly Efficient Thick-Film Inverted Polymer Solar Cells

Thick Film Polymer Solar Cells Based on Naphtho[1,2‐c:5,6‐c]bis[1,2,5]thiadiazole Conjugated Polymers with Efficiency over 11%

Naphtho[1,2-b:5,6-b′]dithiophene-Based Small Molecules for Thick-Film Organic Solar Cells with High Fill Factors

All-polymer Solar Cells Based on Side-Chain-isolated Polythiophenes and Poly(perylene Diimide-Alt-dithienothiophene)

A dithieno[3,2- a :3′,2′- j ][5,6,11,12]chrysene diimide based polymer as an electron transport layer for efficient inverted perovskite solar cells

Tuning The Frontier Molecular Orbital Energy Levels Of N-Type Conjugated Copolymers By Using Angular-Shaped Naphthalene Tetracarboxylic Diimides, And Their Use In All-Polymer Solar Cells With High Open-Circuit Voltages

Naphthobisthiadiazole-Based π-Conjugated Polymers for Nonfullerene Solar Cells: Suppressing Intermolecular Interaction Improves Photovoltaic Performance

N-acyldithieno[3,2-b:2',3'-d]pyrrole-based Low-Band-gap Conjugated Polymer Solar Cells with Amine-Modified [6,6]-Phenyl-c61-butyric Acid Ester Cathode Interlayers.

Photovoltaic performance of ladder-type indacenodithieno[3,2-b]thiophene-based polymers with alkoxyphenyl side chains

Naphtho[2,3-c]thiophene-4,9-dione based polymers for efficient fullerene solar cells

Efficient conventional- and inverted-type photovoltaic cells using a planar alternating polythiophene copolymer

Low bandgap copolymer of 1,4-diketopyrrolo[3,4-c]pyrrole and thieno[3,2-b]thiophene: Synthesis and applications in polymer solar cells and field-effect transistors

Low-bandgap Thieno[3,4-C]pyrrole-4,6-dione-polymers for High-Performance Solar Cells with Significantly Enhanced Photocurrents

Novel Two‐dimensional Donor–acceptor Conjugated Polymers Containing Quinoxaline Units: Synthesis, Characterization, and Photovoltaic Properties

Photovoltaic Properties of DPP-based Two- and Three-component Polymers

Rational Design Dithieno[3,2‐f:2′,3′‐h]quinoxaline‐Based Polymers with Optimized Molecular Configuration and Charge Transfer for High‐Performance All‐Polymer Solar Cells

Theoretical investigations on donor-acceptor conjugated copolymers based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for organic solar cell applications

N-Type Quinoidal Polymers Based on Dipyrrolopyrazinedione for Application in All-Polymer Solar Cells

Ladder-Type Dithienonaphthalene-Based Donor–Acceptor Copolymers for Organic Solar Cells

Synthesis of Two Benzo[1,2-B:3,4-B′]dithiophene-based Conjugated Polymers with Different Side Chains and Their Applications in Photovoltaic Devices

Design and Synthesis of Dithieno[3,2‐b:2′3′‐D]pyrrole‐based Conjugated Polymers for Photovoltaic Applications: Consensus Between Low Bandgap and Low HOMO Energy Level