Active compensation of low-order aberrations with reflective beam shaper

liu wenguang,zhou qiong,feng fei,jiang zongfu
DOI: https://doi.org/10.1117/1.OE.53.9.096103
IF: 1.3
2014-01-01
Optical Engineering
Abstract:A reflective beam shaper is designed for the purpose of compensation of the low-order aberrations in high-power slab lasers. A proportional-integral-derivative (PID) control algorithm is used to control the optical parameters of a beam shaper for active compensation of low-order aberrations. Simulations of the PID algorithm show that different combinations of defocus, 0-deg astigmatism, and 45-deg astigmatism, which are the main contributors of beam aberrations in slab lasers, can be well compensated by variation of distance and rotation angle of mirrors. For a beam with large wave aberrations [peak-to-valley (PtV) = 87.7 lambda, root-mean-square (RMS) = 19 lambda], the adjustment of distance between mirrors is less than 100 mm, and the rotation angle about the z-axis is < 3.2 deg, and the wavefront distortion is reduced to a level (PtV = 0.50 lambda, RMS = 0.09 lambda) that can be further corrected with one deformable mirror. The effectiveness and performance of low-order aberration compensation with the reflective beam shaper are also verified by experiments. (C) 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)
What problem does this paper attempt to address?