Abstract:Purpose - The purpose of this paper is to present an optimal posture evaluation model to control the assembly gaps in aircraft wing assembly. The gaps between two mating surfaces should be strictly controlled in precision manufacturing. Oversizing of gaps will decrease the dimensional accuracy and may reduce the fatigue life of a mechanical product. To reduce the gaps and keep them within tolerance, the relative posture (orientation and position) of two components should be optimized in the assembly process. Design/methodology/approach - Based on the step alignment strategy, i.e. preliminary alignment and refined alignment, the concept of a small posture transformation (SPT) is introduced. In the preliminary alignment, an initial posture is estimated by a set of auxiliary locating points, with which the components can be quickly aligned near each other. In the refined alignment, the assembly gaps are calculated and the formulation of the gaps with component posture is derived by the SPT. A comprehensive weighted minimization model with gap tolerance constraints is established for redistributing the gaps in multi-regions. Powell-Hestenes-Rockafellar optimization, Singular Value Decomposition and K-Dimensional tree searching are introduced for the solution of the optimal posture for localization. Findings - Using the SPT, the trigonometric posture transformation is linearized, which benefits the iterative solution process. Through the constrained model, overall gaps are minimized and excess gaps are controlled within tolerance. Practical implications - This method has been tested with simulated model data and real product data, the results of which have shown efficient coordination of mating components. Originality/value - This paper proposed an optimal posture evaluation method for minimizing the gaps between mating surfaces through component adjustments. This will promote the assembly automation and variation control in aircraft wing assembly.

Fitting Optimization Based on Weighted Gaussian Imaging Method for Auto Body Taillight Assembly

Autobody taillight assembly modeling and fitting variation sensitivity analysis

Curve fitting optimization based on a mixed model for assembly applications

Auto Body Taillight Assembly Modeling and Fitting Variation Induced by Tighten‐up Sequence Analyzing

An Assembly Gap Control Method Based on Posture Alignment of Wing Panels in Aircraft Assembly

Matching Optimization Analysis of Complex Structure with Multiple Error Sources Based on Gaussian Mapping

The Non-Closed Parts Optimal Fitting Method Based on Curvature Hausdorff Distance Using 3D Non-Contact Measurement Points

Optimization of 3D Tolerance Design Based on Cost–Quality–Sensitivity Analysis to the Deviation Domain

The Optimal Method of Autobody Front End Matching Based on Fractional Hausdorff Distance

A New Method for Fitting Car Doors Allowing for the Thermal Effects of Welding

Research on Deviation of Car Taillight Caused by Assembly Force Using FEA

Optical design of free face reflective headlamps

Free-form surface parts quality inspection optimization with a novel sampling method

Optimum Design of an Automotive Inner Door Panel with A Tailor-Welded Blank Structure

Lightweight optimization of the front end structure of an automobile body using entropy-based grey relational analysis

Variation Modeling and Locating Optimization for Automotive Fender Assembly

A new optimization strategy for multi-objective design of automotive seat frame

On Optimization of 3D Matching of Auto-body Based on Genetic Algorithm

Robust Design in Taillight Area Based on Norms of Influence Coefficient Matrix

Optimal design of automotive body B-pillar using simplified finite element model of body-in-prime combined with an optimization procedure

An adaptive multi-objective optimization method for structure-connection-performance design of commercial vehicle cab