Abstract:Porous silicon nitride ceramics with various porosities were fabricated by liquid phase sintering of mixtures containing fibrous and equiaxed α‐Si3N4 powder with a various content ratios. The effects of the contents of the fibrous α‐Si3N4 powder (0%–100%) on the microstructure and mechanical properties of porous Si3N4 ceramics were studied. As the increase of the fibrous α‐Si3N4 powder content, both the density of green bodies and the linear shrinkage decreased, resulting in increased porosity due to the inhibited densification by the fibrous Si3N4 particle. XRD analysis proved the complete formation of single β‐Si3N4 phase. SEM analysis revealed that the microstructure of the low content of fibrous α‐Si3N4 porous ceramics was almost composed of fine elongated β‐Si3N4 grains with high aspect ratio while numerous coarse elongated β‐Si3N4 grains with low aspect ratio surrounding fine grains were formed as the content of the fibrous α‐Si3N4 powder increased. With the increase in content of the fibrous α‐Si3N4 powder from 0% to 100%, the porosity changed from 47.8% to 56.6%, and the flexural strength decreased from 146 to 62 MPa correspondingly, indicating a flexural adjustment of the porosity and mechanical properties.

Fabrication and Property of Porous Silicon Nitride Ceramics with Y2O3-Yb2O3 Additions

Fabrication and characterisation of porous silicon nitride ceramics using Yb2O3 as sintering additive

Microstructural Evolution and Mechanical Properties in Yb2o3-Fluxed Silicon Nitride Ceramics

Microstructural Evolution and Mechanical Properties in Yb2O3–Fluxed Silicon Nitride Ceramics

Effects of Sintering Additive and Β-Si3n4 Phase Contents on the Properties of Porous Si3N4 Ceramics

Effect of Sintering Additives on Microstructure and Mechanical Properties of Porous Silicon Nitride Ceramics

Fabrication and Mechanical Properties of Porous Silicon Nitride Ceramics from Low-Purity Powder

Effects of Sintering Additives on Properties of Porous Silicon Nitride Ceramics Fabricated by Carbothermal Reduction

Microstructure and Mechanical Properties of Silicon Nitride Ceramics with Controlled Porosity

Study on Microstructure and Mechanical Properties of Porous Si<sub>3</sub>N<sub>4</sub> Ceramics

Fabrication and Strengthening of Porous Si3N4 Ceramics by Replacement of Oxide Phase with Si3N4 at Grain Boundary Through Carbothermal Nitridation

Effect of Sintering Additive Composition on Microstructure and Mechanical Properties of Silicon Nitride

Synthesis of Porous Silicon Nitride Ceramics from Diatomite

Effects of Β-Si3n4 Seeds Addition on Microstructure and Mechanical Properties of Porous Si3N4 Ceramics

Study on microstructure and mechanical properties of porous Si3N4 ceramics

Preparation of Porous Si3N4 Ceramics with Controlled Porosity and Microstructure by Fibrous Α‐si3n4 Addition

Fabrication of Porous Silicon Nitride Ceramics with Gradient Microstructure

Secondary crystalline phases and mechanical properties of heat-treated Si3N4

Fabrication and Properties of Porous Si3N4 Ceramic with High Porosity

Fabrication of Porous Silicon Nitride with High Porosity by Diatomite

Fabrication of High-Porosity Silicon Nitride Ceramics with Excellent Mechanical Properties