The Effective Methanol-Blocking and Proton Conductivity Membranes Based on Sulfonated Poly (ether Ether Ketone Ketone) and Polyorganosilicon with Functional Groups
Shuangling Zhong,Bin Wang,Minghui Wang,Yudong Yang,Xing Han,Xuejun Cui
DOI: https://doi.org/10.1016/j.ijhydene.2020.06.035
IF: 7.2
2020-01-01
International Journal of Hydrogen Energy
Abstract:To solve the conflict between high proton conductivity and low methanol crossover of pristine sulfonated aromatic polymer membranes, the polyorganosilicon doped sulfonated poly (ether ether ketone ketone) (SPEEKK) composite membranes were prepared by introducing polyorganosilicon additive with various functional groups into SPEEKK in this study. Scanning electron microcopy (SEM) images showed the obtained membranes were compact. No apparent agglomerations, cracks and pinholes were observed in the SEM images of composite membranes. The good compatibility between polymer and additive led to the interconnection, thus producing new materials with great characteristics and enhanced performance. Besides, the dual crosslinked structure could be formed in composite membranes through the condensation of silanols and the strong interaction between matrix and additive. The formation of dual crosslinked structure optimized the water absorption, enhanced the hydrolytic stability and oxidative stability of membranes. Especially, the incorporation of additive improved the strength and flexibility of composite membranes at the same time, meaning that the life of the composite membranes might be extended during the fuel cell operation. Meanwhile, the proton conductivity improved with increasing additive content due to the loading of more available acidic groups. It is noteworthy that at 25% additive loading, the proton conductivity reached a maximum value of 5.4 x 10(-2) S cm(-1) at 25 degrees C, which exceeded the corresponding value of Nafion@ 117 (5.0 x 10(-2) S cm(-1)) under same experimental conditions. The composite membrane with 20 wt% additive was found to produce the highest selectivity (1.22 x 10(5) S cm(-3)) with proton conductivity of 4.70 x 10(-2) S cm(-3) and methanol diffusion coefficient of 3.85 x 10(-2) cm(2) s(-1), suggesting its best potential as proton exchange membrane for direct methanol fuel cell application. The main novelty of our work is providing a feasible and environment-friendly way to prepare the self-made polyorganosilicon with various functional groups and introducing it into SPEEKK to fabricate the dual crosslinked membranes. This design produces new materials with outstanding performance. (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.