Abstract:Purpose The purpose of this research is to ascertain the feasibility of fabricating polymer optical fibers (POFs) based textile structures by knitting with Polymethylmethacrylate (PMMA) based optical fibers for textile sensor application. It has long been established that by using the principles of physics, POFs have the capability to function as sensors, detecting strain, temperature and other variables. However, POF applications such as strain and pressure sensing using knitting techniques has since not been very successful due to a number of reasons. Commercially available PMMA-based optical fibers tend to be fragile and susceptible to breakages when subjected to stress during the knitting processes. Also light transmitted within these fibers is prone to leakage due to the curvature that results when optical fibers are interlaced or interlooped within fabric structures. Design/methodology/approach Using Stoll's multi-gauge CMS 350 HP knitting machine, five fabric structures namely, 1 × 4 float knit structure, tunnel inlay knit structure, 3:1 fleece fabric and 2:1 fleece fabric structure respectively were used to knit sensor samples. The samples were subsequently tested for length of illumination and sensitivity relative to applied pressure. Findings The results of this preliminary study establish that embedding plastic optical fibers into a knitted structure during the fabric formation process for soft strain sensor application possible. The best illumination performance was recorded for tunnel inlay structure which had an average of 94 cm course length of POF being illuminated. Sensor sensitivity experiments also establish that the relative spectral intensity of the fiber is sensitive to both light and pressure. Problems encountered and recommendations for further research have also been discussed and proffered. Research limitations/implications Due to resource limitations, an innovative technique (use of precision weight set) was used to apply pressure to the sensors. Consequently, information regarding the extent of corresponding sensor deformation has not been used in this initial analysis. Practical implications Because the fundamental step toward finding a solution to any engineering problem is the acquisition of reliable data, and considering the fact that most of the popular technologies used for soft textile sensors are still bedeviled with the problem of signal instability and noise, the success of this application thus has the tendency to promote the wide spread adoption of POF sensors for smart apparel applications. Originality/value As far as research on soft strain sensors is concerned, to the best of the authors' knowledge, this is the first study to have attempted to knit deformable sensors using commercially available POFs.

Light-Emitting Fabrics Integrated with Structured Polymer Optical Fibers Treated with an Infrared Co2 Laser

Unidirectional Lasing from A Spiral-Shaped Microcavity of Dye-Doped Polymers

Electron-beam-activated Light-Emitting Polymer Nanofibers.

Melt-Spun Photoluminescent Polymer Optical Fibers for Color-Tunable Textile Illumination

Functionalized Polymer Nanofibers: a Versatile Platform for Manipulating Light at the Nanoscale

Integrated Photonics Put at Full Stretch: Flexible and Stretchable Photonic Devices Enabled by Optical and Mechanical Co-Design

Side Illumination Behavior and Mechanical Properties of Twisted End‐Emitting Polymer Optical Fiber Bundles

Narrow Emission from Polyimide Light-Emitting Diodes

Polymeric Optical Fiber Fabrics for Illumination and Sensorial Applications in Textiles

A colour-tunable, weavable fibre-shaped polymer light-emitting electrochemical cell

Jacquard-Woven Photonic Bandgap Fiber Displays

Femtosecond laser fabrication of long period fiber gratings by a transversal-scanning inscription method and the research of its orientational bending characteristics

Full-color fiber light-emitting diodes based on perovskite quantum wires

Fabrication of a polymer-coated silver hollow optical fiber with high performance.

Luminous behavior and tensile property of twisted side-emitting polymer optical fibers bundles

A preliminary study of polymer optical fiber's knittability for smart wear applications

Controlling the Chain Orientation and Crystal Form of Poly(9,9-dioctylfluorene) Films for Low-Threshold Light-Pumped Lasers

Flexible Efficient Top-Emitting Organic Light-Emitting Devices on a Silk Substrate

Extra thin sidelight-emitting polymer optical fiber narrow fabrics for UV structural adhesive joints: design, preparation and performance experiments

Respiratory fabric sensor based on the side luminescence and photosensitivity mechanism of polymer optical fibers

Compact Fiber Strain Sensor Fabricated by a CO2 Laser.