Abstract:Advances in Structural Engineering, Ahead of Print. The external excitations, interface forces and responses at the interface degrees-of-freedom are normally required in many existing substructural condition assessment methods, while they are difficult or even impossible to be accurately measured. To address this issue, a digital twin framework for output-only substructural damage identification with data fusion of muti-type responses is proposed in the present paper. First, heterogeneous responses including displacements, strains and accelerations from the target substructure are measured and divided into two sets. The multi-type responses in measurement set 2 are reconstructed with the first set of responses and transmissibility matrix in time domain. Then, a recovery method is introduced to obtain angular displacements from translational displacements and strains, to acquire angular accelerations from translational accelerations and the second order derivatives of strains by continuous wavelet transform. The recovered angular displacements and angular accelerations are involved into the evaluation of objective function. Besides, to avoid the single and monotonous search operation of traditional optimization algorithms, a reinforced learning-assisted Q-learning hybrid evolutionary algorithm (QHEA) by integrating Q-learning algorithm, differential evolution algorithm, Jaya algorithm, is developed as a search tool to solve the optimization-based inverse problem. The most suitable search strategy among DE/rand/1, DE/rand/2, DE/current-to-best/1, Jaya mutation in each iteration is selected and implemented under the guidance of Q-learning algorithm. Numerical studies on a three-span beam structure are performed to verify the effectiveness of the proposed approach. The results demonstrates that the proposed output-only substructural damage identification approach can accurately identify locations and severities of multiple damages even with high noise-polluted responses.

Structural damage detection with limited input and output measurement signals

Structural damage identification with unknown external inputs based on the sparse constraint

Damage Identification of Frame Structures with Joint Damage under Earthquake Excitation

An Output‐only Structural Condition Assessment Method for Civil Structures by the Stochastic Gradient Descent Method

Test Analysis of Detection of Damage to a Complicated Spatial Model Structure

Two-stage damage detection to a benchmark structure using ambient data

Structural damage detection based on cross-correlation function with data fusion of various dynamic measurements

Structural damage identification using static test data and changes in frequencies

An Efficient Algorithm for Simultaneous Identification of Time-Varying Structural Parameters and Unknown Excitations of A Building Structure

Substructural identification for damage estimation of structures

Substructural damage identification in a digital twin framework using heterogeneous response reconstruction

Structural damage identification using system dynamic properties

Global–Local Damage Diagnostic Approach for Large Civil Structures with Very Limited Sensors

Structural Damage Detection Using Changes in Natural Frequencies: Theory and Applications

Structural Damage Identification Based on Substructure Sensitivity and L 1 Sparse Regularization

A Structural Damage Identification Method Based on Stable Ambient Excitation

Efficient Structural Damage Detection with Minimal Input Data: Leveraging Fewer Sensors and Addressing Model Uncertainties

A Multi-Objective DIRECT Algorithm Towards Structural Damage Identification with Limited Dynamic Response Information

Efficient structural damage detection via the lω regularization and randomized extended Kaczmarz algorithm

Structural Damage Identification Based on Transmissibility in Time Domain

Structural damage detection based on fundamental Bayesian two-stage model considering the modal parameters uncertainty