Abstract:Herein, the processing of multi-material vitrimers with heterogenous properties along their x-,y- and z-axis is demonstrated using dual-vat digital light processing (DLP) 3D printing. The printer is based on a conventional vat exchange set-up containing two vats and a cleaning station, which are positioned on a linearly moving platform, and are exchanged automatically during the layer-by-layer build-up of the object. Two thiol-acrylate resins are selected bearing ample -OH and ester moieties, which undergo thermo-activated transesterification in the presence of an organic phosphate as catalyst. Based on the functionality of the acrylate monomers, printing of multi-material structures with flexible ( σ = 1.1 MPa, ε = 14.0%) and rigid ( σ = 33.3 MPa, ε = 4.4%) domains is feasible. A good interlayer adhesion between the soft and hard domains is evidenced by uniaxial tensile tests, whilst optical microscopy is used to study the interface. Dynamic mechanical analysis further shows that the stiffness of the photopolymers varies over several orders of magnitude ( E ' 23°C = 209 kPa - 507 MPa). Jacobs working curves of the two different resins reveal comparable printing parameters at higher exposure doses, which do not only facilitate the printing of multiple materials between individual layers (z-heterogeneity) but also within the same layer (x,y-heterogeneity). This is confirmed by the printing of a multi-material gripper as "proof of concept" demonstrator, which contains soft inner teeth and a stiff outer core. Gripping and releasing of objects is shown by exploiting the glass transition-based shape memory properties of the stiff domains. Moreover, due to the dynamic nature of the covalent bonds, damages inserted into the gripper are intrinsically repairable due to a thermo-activated macroscopic reflow. Shape memory experiments further confirmed that the multi-material gripper fully regains its function after the thermal mending process. Thus, the results clearly show that objects with a high degree of functionality can be realized by combining multi-material 3D printing with the chemistry of vitrimers. This is of particular interest for future soft robotic applications and for mimicking biological composite structures.

3D Soft Lithography: A Fabrication Process for Thermocurable Polymers

Molded Transparent Photopolymers and Phase Shift Optics for Fabricating Three Dimensional Nanostructures.

Microfabrication of 3D-Polymeric Structures Using Soft Lithography for Tissue Engineering

Recyclable Thermosetting Polymers for Digital Light Processing 3D Printing

Development of Dual-curing Thermoset Materials using a Novel UV-initiated Mechanism Suitable for 3D Printing Applications

Design and integration of end-effector for 3D printing of novel UV-curable shape memory polymers with a collaborative robotic system

Digital Light 3D Printing of Double Thermoplastics with Customizable Mechanical Properties and Versatile Reprocessability

3D printing of thermosets with diverse rheological and functional applicabilities

Optical Fabrication of Three-Dimensional Polymeric Microstructures

Photopolymerizable semi-crystalline polymers for thermally reversible, 3D printable cast molds

Single-vat single-cure grayscale digital light processing 3D printing of materials with large property difference and high stretchability

High-Efficiency High-Resolution Multimaterial Fabrication For Digital Light Processing-Based Three-Dimensional Printing

Vat Photopolymerization 3D-Printing of Dynamic Thiol-Acrylate Photopolymers Using Bio-Derived Building Blocks

High Resolution Dual Material Stereolithography for Monolithic Microdevices

Hybrid Multimaterial 3D Printing Using Photocuring-While-Dispensing

Dual-vat photopolymerization 3D printing of vitrimers

Rapid Open‐Air Digital Light 3D Printing of Thermoplastic Polymer

Molds with Advanced Materials for Carbon Fiber Manufacturing with 3D Printing Technology

Wavelength Selective Multi-Material 3D Printing of Soft Active Devices Using Orthogonal Photoreactions.

A Mechanical Performance Study of Dual Cured Thermoset Resin Systems 3D-Printed with Continuous Carbon Fiber Reinforcement