Abstract:Herein, the processing of multi-material vitrimers with heterogenous properties along their x-,y- and z-axis is demonstrated using dual-vat digital light processing (DLP) 3D printing. The printer is based on a conventional vat exchange set-up containing two vats and a cleaning station, which are positioned on a linearly moving platform, and are exchanged automatically during the layer-by-layer build-up of the object. Two thiol-acrylate resins are selected bearing ample -OH and ester moieties, which undergo thermo-activated transesterification in the presence of an organic phosphate as catalyst. Based on the functionality of the acrylate monomers, printing of multi-material structures with flexible ( σ = 1.1 MPa, ε = 14.0%) and rigid ( σ = 33.3 MPa, ε = 4.4%) domains is feasible. A good interlayer adhesion between the soft and hard domains is evidenced by uniaxial tensile tests, whilst optical microscopy is used to study the interface. Dynamic mechanical analysis further shows that the stiffness of the photopolymers varies over several orders of magnitude ( E ' 23°C = 209 kPa - 507 MPa). Jacobs working curves of the two different resins reveal comparable printing parameters at higher exposure doses, which do not only facilitate the printing of multiple materials between individual layers (z-heterogeneity) but also within the same layer (x,y-heterogeneity). This is confirmed by the printing of a multi-material gripper as "proof of concept" demonstrator, which contains soft inner teeth and a stiff outer core. Gripping and releasing of objects is shown by exploiting the glass transition-based shape memory properties of the stiff domains. Moreover, due to the dynamic nature of the covalent bonds, damages inserted into the gripper are intrinsically repairable due to a thermo-activated macroscopic reflow. Shape memory experiments further confirmed that the multi-material gripper fully regains its function after the thermal mending process. Thus, the results clearly show that objects with a high degree of functionality can be realized by combining multi-material 3D printing with the chemistry of vitrimers. This is of particular interest for future soft robotic applications and for mimicking biological composite structures.

Single-vat single-cure grayscale digital light processing 3D printing of materials with large property difference and high stretchability

4D Printing of a Digital Shape Memory Polymer with Tunable High Performance

3D Printable Elastomers with Exceptional Strength and Toughness

Multi-Material 3D Printing of Highly Stretchable Silicone Elastomer.

Digital Light 3D Printing of Double Thermoplastics with Customizable Mechanical Properties and Versatile Reprocessability

Modular soft stretchable low-cost elastomers for stereolithography printing structures with extreme dissipative properties

High-Efficiency High-Resolution Multimaterial Fabrication For Digital Light Processing-Based Three-Dimensional Printing

High-fidelity and high-efficiency additive manufacturing using tunable pre-curing digital light processing

Dual-vat photopolymerization 3D printing of vitrimers

Printable Multi-Stage Variable Stiffness Material Enabled by Low Melting Point Particles Additives

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

Digital light processing 4D printing multilayer polymers with tunable mechanical properties and shape memory behavior

Simultaneous Color‐ and Dose‐Controlled Thiol–Ene Resins for Multimodulus 3D Printing with Programmable Interfacial Gradients

3D printing of ultra-high viscosity resin by a linear scan-based vat photopolymerization system

One-Pot Printing of Robust Multimaterial Devices

Reconfigurable Polymer Networks for Digital Light Processing 3D Printing

Digital Light Processing 3D Printing of Enhanced Polymers via Interlayer Welding

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligoester Resins via Diacid and Diol Exploration

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligomeric Polyester Resins via Diacid and Diol Exploration

Light-oriented 3D printing of liquid crystal/photocurable resins and in-situ enhancement of mechanical performance