Abstract:A linear failure criterion is widely used in slope stability analyses. However, the strength envelope of almost all geomaterials has the nature of nonlinearity. This paper computes rigorous upper bounds on slope stability factors under the condition of plane strain with a nonlinear yield criterion by employing the upper bound theorem of plasticity. A stability factor (or a limit load) computed using a linear Mohr-Coulomb (MC) failure criterion which circumscribes the actual nonlinear failure criterion is an upper bound value of the actual stability factor (or limit load). In this paper, an improved method using a generalized tangential technique to approximate a nonlinear failure criterion is proposed to estimate the stability factor of a slope on the basis of the upper bound theorem of plasticity. Using the generalized tangential technique, the curve of the nonlinear failure criterion is simplified as a set of straight lines according to the linear MC failure criterion. The straight line is tangential to the curve of the nonlinear failure criterion. The set of straight lines of the linear MC failure criterion is employed to formulate the slope stability problem as a classical optimization problem. The objective function formulated in this way is minimized with respect to the location of sliding body center and the location of tangency point. Two typical slope stability problems (a homogeneous soil slope with two slope angles and a vertical cut slope with a tension crack) are analyzed using the proposed method. For the soil slope with two slope angles, the computed results are compared with published solutions by others. The comparison shows that the proposed method gives reasonable and consistent values of the stability factor of the slope. For the vertical cut slope with a tension crack, a statically admissible stress field is constructed for the slope. The stress field does not violate the nonlinear failure criterion. Lower bound solutions are obtained by satisfying stress equilibrium conditions. The upper bound solutions obtained from the proposed method are equal to the lower bound solutions for the vertical cut slope. The agreement further supports the validation of the proposed approach. The influences of the strength parameters in the nonlinear criterion on the stability of slopes are also studied and discussed in this paper.

Effects of shear strength reduction strategies on safety factor of homogeneous slope based on a general nonlinear failure criterion

Slope Failure Criteria of Shear Strength Reduction Finite Element Method

Slope Stability Analysis Considering Different Contributions of Shear Strength Parameters

Slope Stability Analysis with Nonlinear Failure Criterion

A Novel Strength Reduction Method for a Slope Stability Assessment Based on a Finite Element Method

Seismic analysis of coastal slope stability considering strength nonlinearity and tension cut-off

Reliability analysis of progressive failure of strain softening slope

Reliability analysis of slopes reinforced by frame-anchor structures under earthquake conditions

Upper Bound Limit Analysis of Slope Stability Based on Translational and Rotational Failure Mechanism

A case study on soil slope landslide failure and parameter analysis of influencing factors for safety factor based on strength reduction method and orthogonal experimental design

Research on Point Safety Factor of Shear Failure Geomaterials

A strength reduction method based on the Generalized Hoek-Brown (GHB) criterion for rock slope stability analysis

Stability analysis of slope in strain-softening soils using local arc-length solution scheme

INFLUENCE OF NONLINEAR STRENGTH OF ROCKFILL ON SLOPE STABILITY OF HIGH FILLS IN MOUNTAINOUS REGIONS

Random Finite-Element Analysis of Slope Considering Strength Anisotropy and Spatial Variability of Soil

Study on risk of entire and partial of slope failure

Finite Element Slope Stability Analysis by Shear Strength Reduction Technique

Modified minimum principal stress estimation formula based on Hoek-Brown criterion and equivalent Mohr-Coulomb strength parameters

A stability analysis of rock slopes using a nonlinear strength reduction numerical manifold method

Stability evaluation of gentle slopes in spatially variable soils using discretized limit analysis method: a probabilistic study

Study of slope stability analysis method based on equivalent Mohr‐Coulomb strength parameters of three‐dimensional stress state