Abstract:The Mohr-Coulomb (M-C) failure criterion has been widely used in engineering practice, which does not efficiently reflect the rock strength characteristics including the hydrostatic pressure effect, Lode angle effect and intermediate principal stress effect. To overcome this weakness, attempts have been made to develop the three-dimensional failure criteria, among which a recently proposed modified Hoke-Brown (H-B) failure criterion based on a two-parameter deviatoric function has an excellent performance. However, the M-C failure criterion is still widely used in practice. In order to avoid the difficulty resulting from the use of three-dimensional failure criterions in engineering, a new approach is proposed to determine the equivalent M-C strength parameters from the three-dimensional modified H-B failure criterion. The procedure for determining the equivalent M-C strength parameters from the modified H-B criterion is demonstrated in detail, and the equivalent M-C strength parameters influenced by the rock strength characteristics are investigated. Results show that dependence of M-C strength parameters on the hydrostatic pressure effect is nonlinear, and the effect of the intermediate principal stress and Lode angle is related to observation range. For a higher hydrostatic pressure, Lode angle has greater influence on the equivalent M-C strength parameters. As the minimum principal stress rises, the effect of intermediate principal stress on instantaneous cohesion is more significant. Verification of this determination method is conducted based on the true triaxial test data of different rock types, demonstrating its applicability. Findings in this paper have significant sense for practical application of the modified H-B failure criterion in the rock engineering.

Research on Point Safety Factor of Shear Failure Geomaterials

Design and Control of Multilevel Loadings Hydraulic System of Direct Shear Apparatus

Study on the Crack Mechanism and Back Analysis of Mechanics Parameters of the Soil Slope in the New Area of MaGang

Slope Failure Criteria of Shear Strength Reduction Finite Element Method

DISCUSSION OF SAFETY FACTOR DEFINITIONS AND COMPUTATION METHODS FOR GEOTECHNICAL STRUCTURES

NEW RESEARCH ON FAILURE CRITERION FOR GEOMATERIAL

Numerical Analysis and Punching Shear Fracture Based Design of Longitudinal Plate to Concrete-Filled CHS Connections

Development of a shear strength model for a rock mass containing a complex fracture system based on direct shear tests: a case study

Stress Distribution in Direct Shear Loading and its Implication for Engineering Failure Analysis

Strength Reduction Method for Slope Stability Analysis Based on a Dual Factoring Strategy

The evaluation for dynamic safety coefficient of rock slope under seismic loading

Criterion of shear failure along a surface inside soil-mass and its application to progressive failure analysis

Slope Stability Analysis Considering Different Contributions of Shear Strength Parameters

Modified minimum principal stress estimation formula based on Hoek-Brown criterion and equivalent Mohr-Coulomb strength parameters

Novel Strength Reduction Numerical Method to Analyse the Stability of a Fractured Rock Slope from Mesoscale Failure

Strength reduction material point method for slope stability

Finite Element Slope Stability Analysis by Shear Strength Reduction Technique

Calculation Method and Parameter Research for Time-History of Factor of Safety of Slopes Subjected to Seismic Load

A novel framework for ascertaining the safety factor and critical slip surface of 3D slopes reinforced with piles

Study on determination method of equivalent Mohr-Coulomb strength parameters of a modified Hoek-Brown failure criterion

Study on risk of entire and partial of slope failure