Structure Optimization of Helium-Cooled Blanket for Fusion Reactor Based on Three-Dimensional Full-Scale Thermal-Hydraulic Analysis
Qiang Lian,Simiao Tang,Longxiang Zhu,Luteng Zhang,Wan Sun,Shasha Liu,Shanshan Bu,Liangming Pan,Wenxi Tian,Suizheng Qiu,G. H. Su,Xinghua Wu,Xiaoyu Wang
DOI: https://doi.org/10.1016/j.fusengdes.2023.113922
IF: 1.905
2023-01-01
Fusion Engineering and Design
Abstract:Fusion energy is widely considered as the most promising method to solve the energy crisis, while the blanket is of vital importance in the fusion device due to its main function of thermal extraction and energy conversion. The high heat flux from plasma and the internal nuclear heat deposition are imposed on fusion blanket. Slice model or two-dimensional model is usually adopted for traditional design of fusion blanket, in which most side effects are neglected, introducing relatively large uncertainty for thermal removal capability of the blanket. In this study, the integral three-dimensional full-scale model is established based on the split-zone method for mesh generation. Based on the validated numerical method, the preliminary thermal-hydraulic analysis of the fullscale model shows that inadequate heat transfer and significant flow distribution difference are encountered for the initial blanket design, in which the full-scale effect is not considered. After that, the specific structure modifications are proposed for different blanket components to solve the abovementioned problems. The maximum temperature of first wall is reduced from 671 & DEG;C to 639 & DEG;C, which is under the material temperature limit of 650 & DEG;C; the inverse V-shaped flow distribution in the cap is modified as more even flow in cap channels; the maximum temperature of the function zone in blanket is reduced from 999 & DEG;C to 759 & DEG;C, which is an important structure modification for the blanket. The integral three-dimensional full-scale thermal-hydraulic analysis is performed after the local structure modification. The results show that the function zone is cooled down obviously by the coolant in the side wall. Compared to the temperature limit of 900 & DEG;C for lithium orthosilicate, there is a more rigorous limit for the beryllium material, since they share the common cooling capability layer by layer while the temperature limit for the latter is only 650 & DEG;C. The three-dimensional full-scale thermal-hydraulic analysis in our research is valuable to evaluate the integral reliability of the fusion blanket.