Abstract:Based on the peridynamics method,the bond model was applied to treat the thermal diffusion of rock and the conventional state model was adopt to simulate the displacement evolution.According to the number of broken bonds between material points,the material damage was determined to track real-time fracture propagation.The interaction between water and rock was realized by applying pressure and temperature of water to fracture surface.And a numerical model was proposed to simulate hydraulic fracturing in high-temperature rock considering the thermal-mechanical coupling effect.The accuracy of the proposed model was verified according to the test results of rock heating fracture propagation.Finally,the morphology of hydraulic fracturing-induced rock fractures were discussed considering the effects of water pressure,rock initial temperature and elastic modulus,the sensitivity of each factor to fracture geometry parameters was analyzed based on the comprehensive sensitivity attribute identification method.The results indicate that under conditions of low water pressure or initial rock temperature,the primary fractures exhibit a near-symmetric distribution,and there is almost no fracture branching.With the increase of water pressure or initial temperature,the number of fracture gradually increases and the bifurcation occurs,the total length and opening degree of fracture also increase.When the mean elastic modulus of rock is small,the fractures are well developed and many tiny cracks appear.With the increase of the average elastic modulus,the number of fracture branches and micro-fractures decreases obviously,and the total length and opening degree of fractures also decrease accordingly,while the rock fracture initiation time increases approximately linearly.The comprehensive sensitivity evaluation of rock material parameters and environmental parameters shows that rock fracture propagation is highly sensitive to elastic modulus and water pressure,but insensitive to water temperature.

Thermal-hydro-mechanical Coupling Damage Model of Brittle Rock

Thermo-mechanical coupling damage constitutive model of rock based on the Hoek–Brown strength criterion

A fully coupled thermo-hydro-mechanical elastoplastic damage model for fractured rock

Investigation of thermal-hydro-mechanical coupled fracture propagation considering rock damage

Micro‐Thermomechanical Modeling of Rocks With Temperature‐Dependent Friction and Damage Laws

Statistical thermal damage constitutive model of rocks based on Weibull distribution

A Numerical Simulation of High-Temperature Rock Hydraulic Fracturing Based on Coupled Thermo-Mechanical Peridynamics

A New Thermo-Mechanical Coupled DEM Model with Non-Spherical Grains for Thermally Induced Damage of Rocks

A coupled hydro-thermo-mechanical model based on TLF-SPH for simulating crack propagation in fractured rock mass

A fully coupled thermo-hydro-mechanical model for fractured rock masses in cold regions

Thermal-mechanical coupling smooth particle hydrodynamics-phase field method modelling of cracking in rocks

A thermodynamic damage model for 3D stress-induced mechanical characteristics and brittle–ductile transition of rock

Damage constitutive model and mechanical properties of jointed rock mass under hydro-mechanical coupling

A Time-Dependent Damage Constitutive Model for Brittle Rock Materials Based on Subcritical Damage Theory

FE Analysis of Rock with Hydraulic-Mechanical Coupling Based on Continuum Damage Evolution

Brittle Damage Mechanics of Rock Mass

A three-dimensional thermal-hydro-mechanical coupling model for simulation of fracturing driven by multiphysics

An Improved Statistical Damage Constitutive Model for Rock Considering the Temperature Effect

Simulation of Shear and Tensile Fractures Using Ductile Phase Field Modelling with the Calibration of P Wave Velocity Measurement and Moment Tensor Inversion

Strain-softening composite damage model of rock under thermal environment

Electrical properties and modeling of single-fractured rocks under thermal-hydro-mechanical coupling