Abstract:Based on the peridynamics method,the bond model was applied to treat the thermal diffusion of rock and the conventional state model was adopt to simulate the displacement evolution.According to the number of broken bonds between material points,the material damage was determined to track real-time fracture propagation.The interaction between water and rock was realized by applying pressure and temperature of water to fracture surface.And a numerical model was proposed to simulate hydraulic fracturing in high-temperature rock considering the thermal-mechanical coupling effect.The accuracy of the proposed model was verified according to the test results of rock heating fracture propagation.Finally,the morphology of hydraulic fracturing-induced rock fractures were discussed considering the effects of water pressure,rock initial temperature and elastic modulus,the sensitivity of each factor to fracture geometry parameters was analyzed based on the comprehensive sensitivity attribute identification method.The results indicate that under conditions of low water pressure or initial rock temperature,the primary fractures exhibit a near-symmetric distribution,and there is almost no fracture branching.With the increase of water pressure or initial temperature,the number of fracture gradually increases and the bifurcation occurs,the total length and opening degree of fracture also increase.When the mean elastic modulus of rock is small,the fractures are well developed and many tiny cracks appear.With the increase of the average elastic modulus,the number of fracture branches and micro-fractures decreases obviously,and the total length and opening degree of fractures also decrease accordingly,while the rock fracture initiation time increases approximately linearly.The comprehensive sensitivity evaluation of rock material parameters and environmental parameters shows that rock fracture propagation is highly sensitive to elastic modulus and water pressure,but insensitive to water temperature.

Electrical properties and modeling of single-fractured rocks under thermal-hydro-mechanical coupling

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

Variation of Fracture Parameters With Pore Pressure and Its Effects on the Anisotropic Electrical Properties of Fractured Rocks

Investigation of thermal-hydro-mechanical coupled fracture propagation considering rock damage

A Numerical Simulation of High-Temperature Rock Hydraulic Fracturing Based on Coupled Thermo-Mechanical Peridynamics

Study on mechanical properties of interbedded rock masses with microcrack based on thermal-mechanical coupling

Phase-Field Modeling of Thermal Fracture and Shear Heating in Rocks with Degraded Thermal Conductivity Across Crack

Damage constitutive model and mechanical properties of jointed rock mass under hydro-mechanical coupling

Effect of Lateral Stress on the Mechanical Properties of Rock Fracture and Its Implication on the Stability of Underground Oil Storage Caverns

Hydraulic Fracturing Mechanism of Rock Mass under Stress-Damage-Seepage Coupling Effect

Thermal-mechanical coupling smooth particle hydrodynamics-phase field method modelling of cracking in rocks

A Micro-Macro Mechanism of Hydraulic Fracturing with Initial Stress State Effect of Brittle Rock

Mechanical Behavior and Fracture Characteristics of Rock with Prefabricated Crack under Different Triaxial Stress Conditions

Characterization and Correlation of Rock Fracture-Induced Electrical Resistance and Acoustic Emission

Effect of temperature and fluid on rock microstructure based on an effective medium theory

Study on the influence of thermo-pressure coupling environment on the fracture properties of shale in deep reservoirs

Modelling of hydro-mechanical coupling and transport in densely fractured rock mass

Micro‐Thermomechanical Modeling of Rocks With Temperature‐Dependent Friction and Damage Laws

Investigation of the Fracture Characteristics of Rock Mass After Thermal–Mechanical Damage Coupling

Unloading-induced Permeability Recovery in Rock Fractures

Modeling of fracture geometry alteration and fracture flow evolution under geostress and water-rock interaction