Abstract:The relative location of inlets and outlets plays an important role in thermal comfort and energy conservation under ventilation modes for the building non-uniform indoor environment. Hence, a comparison study of thermal comfort and energy efficiency of eight widely-used ventilation modes for space heating was conducted in this study. Both subjective experiments and verified computational fluid dynamics (CFD) models were carried out. In the subjective experiments, the vote of local thermal sensation (LTS), overall thermal sensation (OTS) and draft sensation were collected. In the CFD simulations, RNG k-ε model was applied to compare and analyze the air temperature field, turbulence intensity, ventilation effectiveness and air diffusion performance index (ADPI). The thermal comfort results showed that the air inlets are better located at the mid-height level of a wall, and the outlets are located at the same or higher height. While the results of the energy efficiency suggested that the inlets are better installed at the lower level of a wall, and the outlets should be placed far from the inlets. Since the results were conflict, the economic-comfort ratio was introduced to calculate and compare the thermal comfort and energy efficiency simultaneously. The final results concluded that it can achieve excellent thermal comfort performance without sacrificing energy efficiency when the inlets are at the height of 1.2 m of the front wall, and the outlets are at 1.2 m height of the back wall. Hence it is the best choice for the winter air distribution in northern China. This study can offer a guideline for the air terminal arrangements in non-uniform ventilation under heating mode.

Effects of different inlet vent positions on the uniformity of humidity inside a building chamber

Experiment and Simulation Study on Humidity Distribution of an Environmental Chamber

Effects of initial mist conditions on simulation accuracy of humidity distribution in an environmental chamber

Experimental and Numerical Investigation on Humidity Distribution in an Environmental Chamber

Experimental study of humidity field and its characteristics based on environmental chamber

Effect of Inhabitant Behavioral Responses on Adaptive Thermal Comfort under Hot Summer and Cold Winter Climate in China

[Numerical Study of the Effects (correction of Efects) of Size of Inlets and Outlets of Ventilation System in Experimental Space Station Cabin].

Influence of inlet area on thermal natural ventilation in rooms

Comparison study of thermal comfort and energy saving under eight different ventilation modes for space heating

Interaction Effect of Room Opening and Air Inlet on Solar Chimney Performance

A Performance Comparison of Three Ventilation Modes in an Office with Internal Partitions

Influence of Height Difference Between Inlet and Outlet Center on Thermal Stratification in Rooms

Numerical Simulation and Optimization of the Humidity Field in Environmental Chamber of Test with Electric Equipment

Experimental and Numerical Studies on Indoor Hygrothermal Environment with Hygroscopic Building Materials

Study of the air flow pattern for humidity-independent control system

Comparison of performances of displacement and mixing ventilations. Part II: indoor air quality

Experimental Investigation of Two Ventilated Cavities with Effect of Froude Number and Gas Entrainment

The effect of vent openings on the microclimate inside multi-span greenhouses during summer and winter seasons

Wind Tunnel Experimental Study on Single Room Ventilation Affected by Miscellaneous Factors

CFD Analysis of SVOC Mass Transfer in Different Chambers

Experiment and Numerical Simulation on Ventilation System of Office Building