Abstract:Sulfur hexafluoride (SF6) gas, widely used in high-voltage circuit breakers, has a high global warming potential and hence substitutes are being sought. The use of a mixture of carbon tetrafluoride (CF4) and SF6 is examined here. It is known that this reduces the breakdown voltage at room temperature. However, the electrical breakdown in a circuit breaker after arc interruption occurs in a hot gas environment, with a complicated species composition because of the occurrence of dissociation and other reactions. The likelihood of breakdown depends on the electron interactions with all these species. The critical reduced electric field strength (the field at which breakdown can occur, relative to the number density) of hot SF6/CF4 mixtures corresponding to the dielectric recovery phase of a high voltage circuit breaker is calculated in the temperature range from 300K to 3500 K. The equilibrium compositions of hot SF6/CF4 mixtures under different mixing fractions were determined based on Gibbs free energy minimization. Full sets of improved cross sections for interactions between electrons and the species present are presented. The critical reduced electric field strength of these mixtures was obtained by balancing electron generation and loss mechanisms. These were evaluated using the electron energy distribution function derived from the Boltzmann transport equation under the two-term approximation. The result indicates that critical electric field strength decreases with increasing heavy-particle temperature from 1500 to 3500 K. Good agreement was found between calculations for pure hot SF6 and pure hot CF4 and experimental results and previous calculations. The addition of CF4 to SF6 was found to increase the critical reduced electric field strength for temperatures above 1500 K, indicating the potential of replacing SF6 by SF6/CF4 mixtures in high-voltage circuit breakers. (C) 2013 AIP Publishing LLC.

Fundamental Properties of High-Temperature Sf6 Mixed with Co2 As A Replacement for Sf6 in High-Voltage Circuit Breakers

Experimental study on characteristics of co 2 and its gas mixtures with sf 6 for high voltage gas circuit breakers

Investigation on Critical Breakdown Electric Field of Hot Carbon Dioxide for Gas Circuit Breaker Applications

Investigation on Critical Breakdown Electric Field of Hot Sulfur Hexafluoride/Carbon Tetrafluoride Mixtures for High Voltage Circuit Breaker Applications

Influence of O2 on the Dielectric Properties of CO2 at the Elevated Temperatures

Investigation on the Reduced Critical Breakdown Field of Hot CO2 Gas and CO2-based Mixtures

Transport Coefficients of High Temperature SF 6 –he Mixtures Used in Switching Applications As an Alternative to Pure SF 6

Modelling of the Interruption Process in Sf6 High Voltage Circuit Breaker and Preliminary Study of the Arc Characteristics for Different Gases

Study of the Arc Interruption Performance of CO2 Gas in High-Voltage Circuit Breaker

Interruption Characteristic of 3%C5F10O/97%CO2 Gas Mixture in a 40.5kV Circuit Breaker

Analysis of Breaking Characteristics of C4F7N/CO2 Mixture Gas in Circuit Breaker

Investigation on the Dielectric Properties of Hot CO2 and CO2-based Gas Mixtures Based on the Boltzmann Equation Analysis

Comparison of Dielectric Breakdown Properties for Different Carbon-Fluoride Insulating Gases As SF6 Alternatives

The Development of SF6 Green Substitute Gas

Experimental Investigation on the Arc Characteristics and Arc Quenching Capabilities of C5F10O-CO2 Mixtures

Analysis of Insulation Performance and Polar Effect of CF3I/CO2 Mixtures

Dielectric Breakdown Properties of Hot SF6-CO2 Mixtures at Temperatures of 300–3500 K and Pressures of 0.01–1.0 MPa

Study of the Arc Interruption Performance of SF 6 Alternative Gas in 35kV Circuit Breaker

Calculation of Thermodynamic Properties and Transport Coefficients of C5F10O-CO2 Thermal Plasmas

Dielectric Breakdown Properties of Hot Sf6/He Mixtures Predicted from Basic Data

Study of the Arc Interruption Performance of SF6 Alternative Gases in Load Switch