Abstract:White organic light-emitting devices based on a red fluorescent dye 3-（dicyanomethylene）-5, 5-dimethyl-1-（4-dimethylamino-styryl） cyclohexene（DCDDC） were fabricated and investigated. Two kinds of devices were processed using ultrathin technology and doping technology. The structures of the devices were as followed: 1） indium-tin oxide （ITO）/N, N′-diphenyl-N, N′-bis（1-naphthyl-pheny1）-1, 1′-biphenyl-4, 4′-diamine （NPB）/4, 4′-bis（2, 2′-diphenylvinyl）-1, 1′-diphenyl （DPVBi）/tris（8-quinolinolato） aluminum （Alq3）/DCDDC/Alq3/Mg:Ag; 2） ITO/NPB /Alq3:DCDDC/NPB/2, 9-dimethyl-4, 7-diphenyl-1, 10-phenanthroline （BCP）/Mg:Ag. The luminescence and efficiency characteristics of these two devices were measured and compared. The results showed that both devices A and B exhibited white light consisting of RGB three primary colors. Moreover, device A had a turn on voltage of 4 V, a maximum power efficiency of 2.4 lm/W at 5.5 V and a maximum luminance of 16690 cd/m2 at 185 V. Also, pure white emission with Commissions Internationale De L’Eclairage （CIE） coordinates near （0.330. 0.300） having a slight variation of （-0.020, +0.002） in a wide range of voltages was observed. In contrast, devices B showed a turn on voltage of 5 V, a maximum power efficiency of 1.4 lm/W at 5.5 V and a maximum luminance of 12580 cd/m2 at 17 V. The CIE coordinates had a red shift as the voltage increased and then kept near the optimum white point of （0.33, 0.33） over 9 V. It was found that the difference in characteristics of these two devices was dependent on the variation of charge recombination zone. To be specific, it was due to the direct charge trapping effect of DCDDC ultrathin layer and the properties of incomplete energy transfer in Alq3:DCDDC doping system.

The pure white light emission from three-layer electroluminescent device

High Performance White Organic Light-Emitting Devices Based on A Novel Red Fluorescent Dye 3-(Dicyanomethylene)-5, 5-Dimethyl-1-(4-dimethylamino-styryl) Cyclohexene

White organic light-emitting diodes based on improved polyfluorene derivative

Steady full colour white organic light-emitting devices consisting of an ultrathin red fluorescent layer

Red Organic Light Emitting Device with Improved Performance Using a Novel Fluorescent Dye Codoped with Phosphor-Sensitizer

A Fluorescein-Centered Polymer As a Phosphor for Fabricating Pure White Light-Emitting Diodes

A Novel White Organic Electroluminescent Device with Both Phosphorescent and Fluorescent Dopants

Polymer white light-emitting diodes with a single emission layer of fluorescent polymer blend

Pure red organic electroluminescent devices using a novel europium(III) complex as emitting layer

White Organic Light Emitting Devices with Hybrid Emissive Layers Combining Phosphorescence and Fluorescence

A study on white organic light-emitting diodes co-doped with red fluorescent and blue phosphorescent dopants

Multilayer White Organic Light-Emitting Diodes with A Single Host Material

White Organic Light-Emitting Devices With A Bipolar Transport Layer Between Blue Fluorescent And Orange Phosphorescent Emitting Layers

High Colour Rendering Index White Organic Light-Emitting Devices with Three Emitting Layers

Efficient White Light-Emitting Organic/Polymeric Electroluminescent Device

Influence of Dopant Concentration on Electroluminescent Performance of Organic White-Light-Emitting Device with Double-Emissive-Layered Structure

A Novel N-Type Red Luminescent Material for Organic Light-Emitting Diodes

Fabrication and Spectra Characteristics of High Efficiency White Organic Light-Emitting Diodes with Single Emitting Layer

Energy Distribution in White Organic Light-Emitting Diodes with Three Primary Color Emitting Layers

Efficient White Electroluminescent Device with Stable Emission Spectrum

High-efficiency Single Emissive Layer Color-Tunable All-Fluorescent White Organic Light-Emitting Diodes