Abstract:Organic light-emitting diode (OLED) has attracted considerable attention due to their unique image quality and market potentials in display field. Efficient blue, green and red emitters with excellent color purity are required for full-color display application, so far great improvements have been achieved for the life time and efficiency of the red and green materials. However, the blue emitting material is still a barrier to commercial applications of OLEDs.Using vacuum thermal evaporation method, blue OLEDs were fabricated by inserting a bathocuproine (BCP) as hole blocking layer (HBL) into conventional double layer (DL) device at the interface of N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine (NPB)/8-hydroxyquinoline aluminum (Alq3). Device structure is indium tin oxide (ITO)/NPB/BCP/Alq/Mg∶Ag, where NPB acts as both hole transporting layer (HTL) and emitting layer (EML), and Alq3 as electron transport layer (ETL). The active emissive area of each device defined by the overlap of ITO and Mg∶Ag was 4 mm×4 mm. Measurements of luminance-voltage (L-V) and current density-voltage (J-V) characteristics were carried out with a Keithley 4200 Semiconductor Characterization System, photoluminescence (PL) and electroluminescence (EL) spectra were measured with an OPT-2000 system. The luminance-voltage and current density-voltage characteristics of devices were investigated, and dif-ferences between their performances were discussed. The results demonstrate that the maximum luminance and luminance efficiency of the BCP device are 2 900 cd/m2 and 0.55 lm/W, respectively. The peak of electroluminescence (EL) spectrum locates at 445 nm and the Commissions Internationale d′Eclairage (CIE) coordinates are (x=0.16, y=0.09), which are independent on the variation of bias voltage. Energy level diagrams were employed to analyze the diversity of device performance with different structures. We find that the high EL performance of the BCP device is attributed to better balance of carriers in the NPB layer by inserting BCP as hole blocking layer (HBL). Optimization of device structure and performance, via adjusting thickness of organic layers, is under investigation.

A Novel N-Type Red Luminescent Material for Organic Light-Emitting Diodes

A Novel Family of Red Fluorescent Materials for Organic Light-Emitting Diodes

Efficient, saturated red electroluminescent devices with modified pyran-containing emitters

Novel Naphtho[2,3‐c][1,2,5]thiadiazole Derivative for Non‐doped Small Molecular Organic Red‐Light‐Emitting Diodes

Red fluorescent materials based on naphthylamine for non-doping OLEDs

Extremely Stable Deep-Blue Organic Light-Emitting Diodes Employing Diindolophenazine-Based Fluorophore with Narrow-Band Emission and a Shallow LUMO Level

Isophorone Derivative As Red Dopant for Organic Electroluminescent Devices

Red-Light-Emitting Organic Electroluminescent Devices with Bisanil Dye As Emitter

Isophorone‐based Fluorescent Dopant for Red Organic Electroluminescence Device

Design, synthesis, and properties of a novel red asymmetric luminescent material incorporating diphenylfumaronitrile, carbazole and acridine units

Efficient red delayed fluorescence molecule based on cyano-substituted 11,12-diphenyldibenzo[ <i>a</i>, <i>c</i>]phenazine acceptor for high-performance organic light-emitting diodes

Red Organic Light Emitting Device with Improved Performance Using a Novel Fluorescent Dye Codoped with Phosphor-Sensitizer

Red Phosphorescent Iridium Complex Containing Carbazole-Functionalized Beta-Diketonate for Highly Efficient Nondoped Organic Light-Emitting Diodes

A Rational Design Strategy For Red Thermally Activated Delay Fluorescence Emitter Employing 2,1,3-Benzothiadiazole Skeleton With Asymmetric Structure

Efficient and Ultra-High Luminance Orange-Red Organic Light Emitting Diode (OLED) Based on Triphenylamine-Benzothiadiazole-phenoxazine Hybrid Molecule with Hybrid Local and Charge-Transfer (HLCT) Characteristic

Fabrication and Characterization of Blue Organic Light-emitting Diodes Based on N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine

N-phenyl-carbazole derivative as red dopant in organic electroluminescent device

Synthesis and Electroluminescence Properties of Benzothiazole Derivatives

Red Phosphorescent Organic Light-Emitting Diodes Based on a Novel Host Material with Thermally Activated Delayed Fluorescent Properties

Reddish orange light-emitting diodes made with N,N′-bis (1-naphthyl) -3,4,9,10-perylenbis(dicarboximide)

A Dithienylbenzothiadiazole Pure Red Molecular Emitter with Electron Transport and Exciton Self‐Confinement for Nondoped Organic Red‐Light‐Emitting Diodes