Abstract:Different PDs ranging from 40 MWth/m3 to 300 MWth/m3 are introduced in a SD‐TMSR core and an IMSFR core to evaluate the breeding performance. It is found that a small PD less than 150 MWth/m3 is preferred to achieve a positive breeding gain and a positive net 233U production in the SD‐TMSR, while a higher PD ranging from 150 MWth/m3 to 200 MWth/m3 is more attractive to acquire a higher net 233U production of more than 146 kg/year and a shorter DT of less than 35 years in the IMSFR. Summary A liquid‐fueled molten salt reactor (MSR) can be flexibly designed with a broad range of power density (PD) and neutron spectrum, both of which have a strong impact on the breeding performance of the fuel cycle. In this work, a thermal single fluid double‐zone Th‐based MSR (SD‐TMSR) and an improved molten salt fast reactor (IMSFR) with different PDs ranging from 40 to 300 MWth/m3 are introduced to evaluate the breeding performance. The results indicate that the breeding ratios for the pure Th‐U (BRTU ) and the fissile fuel (BRfis ) at equilibrium state are negatively correlated with PD. As the PD increases from 40 to 300 MWth/m3, the BRTU declines by about 9.2% and 5.6% in the SD‐TMSR and IMSFR, respectively, due to the decreases in the probability of the natural decay and extraction of 233Pa in its total vanishment and of the ratio of the 232Th capture rate to the 233U absorption rate. Meanwhile, the BRfis keeps about 6% lower than the BRTU in both the cores because of the larger absorption cross sections of 235U and 239Pu than the capture cross sections of their parent nuclides. Owing to the low capture‐to‐fission ratios of minor actinides (MAs) and the reduced absorption cross sections of fission products, the BRTU and BRfis in the IMSFR keep about 6% higher than those in the SD‐TMSR when PD varies from 40 to 300 MWth/m3. In addition, the net 233U production can achieve the highest value of 60.5 kg/year at 90 MWth/m3 in the SD‐TMSR, and it is 154.9 kg/year at 200 MWth/m3 in the IMSFR. Although the net 233U production in the IMSFR is higher than that in the SD‐TMSR, the doubling time (DT) keeps larger in the IMSFR with the increase of PD from 40 to 100 MWth/m3 due to its higher initial loading of fissile material. In addition, the highest net 233U production of 154.9 kg/year in the IMSFR with a PD of 200 MWth/m3 can be used as the igniting fissile fuel for the SD‐TMSR, in which the corresponding DT is as short as 8.3 years. In conclusion, to achieve a thorium breeding in MSRs with different neutron spectra, a small PD less than 150 MWth/m3 is preferred to achieve a positive breeding gain and a positive net 233U production in the SD‐TMSR, while a higher PD ranging from 150 to 200 MWth/m3 is more attractive to acquire a higher net 233U production of more than 146 kg/year and a shorter DT of less than 35 years in the IMSFR.

Optimization of Temperature Coefficient and Breeding Ratio for a Graphite-Moderated Molten Salt Reactor

Core Optimization for Extending the Graphite Irradiation Lifespan in a Small Modular Thorium-Based Molten Salt Reactor

The influence of graphite moderator density on the neutronic performance and fuel economy of a Molten Salt Reactor

The Study of Continuous Core Zoning to Extend the Graphite Component Irradiation Lifespan in Molten Salt Reactor

Flattening of Fast Neutron Flux Distribution in Molten Salt Reactor for Longer Graphite Moderator Lifetime

Coupled neutronics/thermal-hydraulics and safety characteristics of liquid-fueled Molten Salt Reactors

The neutronic characteristics of thermal molten salt reactor

Neutronics and thermal-hydraulics coupled analysis on dimensional change and lifespan of graphite components in small modular molten salt reactor

Analysis of the thermal feedback effect and nuclides flow effect on the fuel‐cycle characteristics of Molten Salt Reactors

Low enriched uranium and thorium fuel utilization under once‐through and offline reprocessing scenarios in small modular molten salt reactor

A novel concept for a molten salt reactor moderated by heavy water

An improved core design of a 50 kWth heat pipe cooled micro Molten Salt Reactor (micro-MSR)

Possible Configurations for the Thorium Molten Salt Reactor and Advantages of the Fast Nonmoderated Version

A neutronic evaluation of a thorium-based molten salt breeder reactor

Neutronic effect of graphite dimensional change in a small modular molten salt reactor

Neutronics/Thermal-hydraulics Coupling Analysis for the Liquid-Fuel MOSART Concept

Core neutronic design of small modular molten salt reactor for submarine propulsion

Three dimensional steady‐state neutronics/thermal‐hydraulics coupled simulation for a molten salt reactor moderated by zirconium hydride rods

Whole core analysis of the single-fluid double-zone heavy water-moderated molten salt reactor (SD-HWMSR)

Effect of reprocessing on neutrons of a molten chloride salt fast reactor

Impacts of power density on the breeding performance of molten salt reactors