Abstract:Conjugate heat transfer numerical simulation of a transonic internal cooled turbine vane is carried out with a third-order accuracy TVD (Total Variation Diminishing) scheme and multi-block structured grids using the code developed in this paper. Comparison between results of commercial CFD codes with several turbulence models and those of this code show that it is incorrect of computational codes to predict the thermal boundary layer with traditional turbulence models, and that the turbulence models considering transitional phenomenon is able to acquire better accurate heat transfer in thermal boundary layer despite of certain deficiencies yet. The predicted distributions of aerodynamic parameters agree well with the experiments except for the temperature and heat transfer coefficient over the profile surface, which are largely different from the measured data. Results by Star-CD with V2-F model meet the same problem. Results by the code of this paper are close to those by CFX with K-ω-SST-ML transition model. Adopting transition model of Menter & Langtry (Shear-Stess-Transition model) gives the best results by adjusting the transition onset momentum thickness Reynolds number and the inlet viscosity ratio, especially for the mid part of the suction side where the validation accuracy is of a serious shortage by traditional turbulence model. It is proved in this paper that commercial codes have the ability to simulate transition process and thermal boundary layer accurately, but the designer’s experience is of utmost importance. Robust transition turbulence model should be developed further. PSE stability analysis equation and e-N prediction method are both integrated in this paper. It is concluded that boundary layer stability analysis by PSE method can be applied to the prediction of the transition onset without too many experiences and is able to define the empirical turbulence parameters for the accurate simulation of thermal boundary layer for any airfoil, such as the very important transition onset momentum thickness Reynolds number.

Thermal Hydraulic Investigations and Optimization on the Evc System of A Pwr by Cfd Simulation

Development of CFD Methodology for Investigating Thermal-Hydraulic Characteristics in a PWR Dome

Numerical Investigation on the Thermal Stratification in a Pressurizer Surge Line

Numerical Investigation on the Thermal-Hydraulic Characteristics near a Corroded Lower Head of the Reactor Vessel During IVR-ERVC

Assessment Of Performance Of Turbulence Models Of Cfx In Predicting Supercritical Water Heat Transfer In A Vertical Tube

Numerical study on the thermal hydraulic characteristics of ERVC system

Numerical Investigations of Tangential Direction Cooling in the Intermediate Pressure Cylinder (Ipc)

3d Flow Field Analysis For A Traditional Ii Plus Pwr Containment Under Normal Condition

Simulation On The Thermal Hydraulics Of The Coolant In A Pebble Bed Reactor Core By Cfd

Conjugate Heat Transfer Numerical Validation and PSE Analysis of Transonic Internally-Cooled Turbine Cascade

CFD simulation on the transient process of coolant mixing phenomenon in reactor pressure vessel

Numerical Investigations On The Cooling Performance Of The Internal Bypass Cooling System Of The Ultra-Supercritical Steam Turbines Using Cfd And Conjugate Heat Transfer Method

The Preliminary Research of Thermal-Hydraulic Behavior of an Inverted Pressurized Water Reactor

Cfd Investigating the Effects of Different Mixing Vane Designs on the Localized Thermal-Hydraulic Characteristics in the Rod Bundles with Grid Spacer

CFD Simulation of Thermal Hydraulic Characteristics in a Typical Upper Plenum of RPV

Experimental Study on PIV Measurement and CFD Investigation of the Internal Flow Characteristics in a Reactor Coolant Pump

CFD simulation of thermal hydraulic phenomena in enclosed cavity of nuclear power plants

CFD analysis for full vessel upper plenum in Maanshan Nuclear Power Plant

Improvement and Validation of the Heat Transfer Model for the Containment Module in the RCS-containment Integral System Code

Cfd Simulation Of Thermal-Hydraulic Characteristics Of Water Seal Structure In Pwr Pressurizer

A Fast and High-Fidelity Multi-Parameter Thermal-Field Prediction System Based on CFD and POD Coupling: Application to the RPV Insulation Structure