Abstract:Solid oxide fuel cells (SOFCs) are a kind of clean and efficient device to convert chemical energy in fuels into electricity. However, since anodes with high catalytic activity and carbon tolerance are still underdeveloped, the consequent serious performance degradation of the cells under operational conditions significantly confines their commercial applications. Here we propose a new strategy to remove carbon deposition by in-situ formation of alkali metal carbonate on the anode surface. A multi-phase composite anode, which is composed of an orthorhombic single perovskite main phase, a Ruddlesden-Popper (RP) layered perovskite second phase, and an in-situ exsolved FeNi alloy minor phase, is developed by one-step reduction of La0.65Li0.05Sr0.3Fe0.8Ni0.2O3-delta (LLSFN0.05) at a high temperature. The deficiencies of the RP phase and A-site caused by Li dopant would increase oxygen bulk diffusion, and FeNi nanoparticles would boost the catalytic activity. Moreover, when dealing with carbon fuel, lithium carbonate can be synthesized on the anode surface, serving as a good oxygen ion conductor and an efficient catalyst for coke removal by gasification. A single cell with our reduced LLSFN0.05 anode exhibited maximum power densities of 596, 467, and 424 mW cm-2 at 750 degrees C with H2, CO, and wet C2H6 as the fuel, respectively. In addition, the cells could have a long-term stable operation for over 80 h using CO as the fuel at 200 mA cm-2. This study provides a new material design strategy to develop a highly active and coke-resistant anode.

SrFe0.75Mo0.25O3− Impregnated 430L Alloys for Efficient Fuel Oxidation in Metal Supported Solid Oxide Fuel Cells

Metal-supported solid oxide fuel cells with impregnated SrFe 0.75Mo0.25O3 cathodes

Symmetrical Solid Oxide Fuel Cells with Impregnated SrFe0.75Mo0.25O3−δ Electrodes

Novel architectured metal-supported solid oxide fuel cells with Mo-doped SrFeO3−δ electrocatalysts

Evaluation of Ni and Ni–Ce0.8Sm0.2O2−δ (SDC) Impregnated 430L Anodes for Metal-Supported Solid Oxide Fuel Cells

Metal Supported Solid Oxide Fuel Cells with Infiltrated Nanoelectrodes

Sr2Fe1.5Mo0.5O6−δ- Sm0.2Ce0.8O1.9Composite Anodes for Intermediate-Temperature Solid Oxide Fuel Cells

A Novel Doped CeO2–LaFeO3 Composite Oxide As Both Anode and Cathode for Solid Oxide Fuel Cells

Metal-supported Solid Oxide Fuel Cells with In-Situ Sintered (bi2o3)0.7(er2o3)0.3–ag Composite Cathode

Enhancing the Performance of Symmetrical Solid Oxide Fuel Cells with Sr2Fe1.5Mo0.5O6-δ Electrodes Via Infiltration of Pr6O11 Bifunctional Catalyst

Novel Metal-Supported Solid Oxide Fuel Cells With Impregnated Symmetric La0.6sr0.4fe0.9sc0.1o3-Delta Electrodes

A Rational Design of FeNi Alloy Nanoparticles and Carbonate-Decorated Perovskite As a Highly Active and Coke-Resistant Anode for Solid Oxide Fuel Cells

Infiltrated Sr 2 Fe 1.5 Mo 0.5 O 6 /la 0.9 Sr 0.1 Ga 0.8 Mg 0.2 O 3 Electrodes Towards High Performance Symmetrical Solid Oxide Fuel Cells Fabricated by an Ultra-Fast and Time-Saving Procedure

Ni Doped La0.6Sr0.4FeO3-δ Symmetrical Electrode for Solid Oxide Fuel Cells

Symmetrical Solid Oxide Fuel Cells Fabricated by Phase Inversion Tape Casting with Impregnated SrFe0.75Mo0.25O3-δ (SFMO) Electrodes

Roles of Fe Ni Nanoparticles and SrLaFeO4 Substrate in the Performance and Reliability of a Composite Anode Prepared Through In-Situ Exsolution for Intermediate Temperature Solid Oxide Fuel Cells (I)

Nano-Structured Anodes of Solid Oxide Fuel Cells

A Micro-Nano Porous Oxide Hybrid for Efficient Oxygen Reduction in Reduced-Temperature Solid Oxide Fuel Cells.

High Activity of Nanoporous‐Sm0.2Ce0.8O2‐δ@430L Composites for Hydrogen Electro‐Oxidation in Solid Oxide Fuel Cells

Enhanced Activities of Nano-Ceo2−δ@430l Composites by Zirconium Doping for Hydrogen Electro-Oxidation in Solid Oxide Fuel Cells

A Novel High Performance Composite Anode with in Situ Growth of Fe-Ni Alloy Nanoparticles for Intermediate Solid Oxide Fuel Cells