Abstract:Organic liquid compound electrolytes are widely applied in conventional lithium-ion batteries. However, their disadvantages of unsafety and complexity of battery fabrication can hardly be avoided [1]. All-solid-state batteries without using liquid electrolytes provide an effective way to overcome these problems and studies on this field are increasing [2]. Solid electrolyte material is the critical factor to affect the electrochemical and cycle performances of all-solid-state batteries. For commercial application of all-solid-state batteries, high ionic conductivity and cyclability at room temperature are indispensable. Metal sulfides are in great potential to meet the practical application as solid electrolytes and a series of solid sulfur compounds with high ionic conductivities have been reported [3,4]. In this work, a new material Li17Ge2P3S20 with new crystal structure has been synthesized via a simple solid state reaction. The new structure is detected using XRD patterns as shown in Figure 1. AC impedance has been performed and the ionic conductivity of Li17Ge2P3S20 is determined to be 8.07×10-3 S/cm at room temperature. Experimental parameters have been optimized and elemental doping has been utilized to enhance the conductivity and stability of this material as solid electrolyte for all-solid-state lithium ion batteries. Acknowledgement This work was financially supported by the Shenzhen Peacock Plan (KQCX20140522150815065)，the Natural Science Foundation of Shenzhen ( JCYJ20150331101823677) and the Science and Technology Innovation Foundation for the Undergraduates of SUSTC(2015x19 and 2015x12) References: [1] Etacheri V, Marom R, Elazari R, et al. Challenges in the development of advanced Li-ion batteries: a review[J]. Energy & Environmental Science, 2011, 4(9): 3243-3262. [2] Notten P H L, Roozeboom F, Niessen R A H, et al. 3‐D integrated all‐solid‐state rechargeable batteries[J]. Advanced Materials, 2007, 19(24): 4564-4567. [3] Kamaya N, Homma K, Yamakawa Y, et al. A lithium superionic conductor[J]. Nature materials, 2011, 10(9): 682-686. [4] Kato Y, Hori S, Saito T, et al. High-power all-solid-state batteries using sulfide superionic conductors[J]. Nature Energy, 2016, 1: 16030. Figure 1

Synthesis and Characterization of Perovskite-Type (li,sr)(zr,nb)o3 Quaternary Solid Electrolyte for All-Solid-state Batteries

Stable Lithium-Ion Conducting Perovskite Lithium–strontium–tantalum–zirconium–oxide System

Low-Temperature Manufacture of Cubic-Phase Li7La3Zr2O12 Electrolyte for All-Solid-State Batteries by Bed Powder

Synthesis of Li7La3Zr2O12 Solid Electrolyte by Solid Phase Sintering Method

Preparation and characterization of LLZO-LATP composite solid electrolyte for solid-state lithium-ion battery

A Novel Solid Electrolyte Material (li17ge2p3s20) with High Ionic Conductivity

Microstructure and ion conductivity of Al‐LLZO solid electrolyte prepared by molten salt and cold sintering process

Structural Manipulation Approaches Towards Enhanced Sodium Ionic Conductivity in Na-rich Antiperovskites

Rational Design of Strontium Antimony Co-Doped Li7La3Zr2O12 Electrolyte Membrane for Solid-State Lithium Batteries

Na10TiP2Se12 As Novel Electrolyte for All-Solid-State Na-Battery

Synthesis of Br-rich argyrodite electrolytes enables all-solid-state batteries with superior battery performances at different operating temperatures

Fabrication of Oxide-Based All-Solid-State Batteries by a Sintering Process Based on Function Sharing of Solid Electrolytes

Antiperovskite Electrolytes for Solid-State Batteries

Preparation and Electrochemical Properties of Bicontinuous Solid Electrolytes Derived from Porous Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 Incorporated with Succinonitrile

A Na-rich Fluorinated Sulfate Anti-Perovskite with Dual Doping As Solid Electrolyte for Na Metal Solid State Batteries

Submicron-Sized Nb-Doped Lithium Garnet for High Ionic Conductivity Solid Electrolyte and Performance of Quasi-Solid-State Lithium Battery

Enhancing ionic conductivity in solid electrolyte by relocating diffusion ions to under-coordination sites

Preparation and electrochemical properties of LLZO co-doping with Al and Ti for all solid-state battery

Developing Preparation Craft Platform for Solid Electrolytes Containing Volatile Components: Experimental Study of Competition between Lithium Loss and Densification in Li7La3Zr2O12

Preparation of Metal-Oxide-Doped Li7P2S8Br0.25I0.75 Solid Electrolytes for All-Solid-State Lithium Batteries

One Stone, Three Birds: Cu2+-Substituted Chloride Electrolyte for High-Performance All-Solid-State Lithium Batteries