Abstract:This study investigates the structural evolution of LiMn0.5Ni0.5O2 cathode materials for Li-ion batteries as a function of synthesis temperature and its effect on electrochemical performance. It is demonstrated that, as the synthesis temperature increases from 400 to 900 °C, a gradual topotactic transformation occurs between a lithiated spinel structure, denoted herein as "lithium-excess spinel" LxS-LiMn0.5Ni0.5O2 (or LxS-LMNO), and the well-known layered LiMn0.5Ni0.5O2 structure prepared at high temperature, HT-LiMn0.5Ni0.5O2 (HT-LMNO). The electrochemical capacity of the LiMn0.5Ni0.5O2 electrodes follows a parabolic trend with increasing synthesis temperature, which is attributed primarily to the gradual transformation of 3-dimensional (3-D) to 2-dimensional (2-D) diffusion pathways for the Li ions. When synthesized at 400 °C, LxS-LiMn0.5Ni0.5O2 electrodes perform well, benefitting from the 3-D network of channels within the LxS structure. By contrast, when prepared at 500-700 °C, LiMn0.5Ni0.5O2 electrodes operate poorly, which is attributed to the formation of locally disordered structural arrangements that impede Li-ion diffusion. Such an increase in local disorder in the mid-temperature synthesis range is attributed to the structural frustration between the lithium-excess spinal and layered end-members. The transformation from the locally disordered to more ordered layered components between 700 °C and 900 °C enhances electrochemical performance. The study opens new avenues for designing next-generation Mn-rich cathode materials by fine-tuning the synthesis conditions as well as the composition and structure of LxS-LMNO electrodes.

Effect of temperature of Li 2 O–Al 2 O 3 –TiO 2 –P 2 O 5 solid-state electrolyte coating process on the performance of LiNi 0.5 Mn 1.5 O 4 cathode materials

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Improving low-temperature performance of spinel LiNi0.5Mn1.5O4electrode and LiNi0.5Mn1.5O4/Li4Ti5O12full-cell by coating solid-state electrolyte Li-Al-Ti-P-O

Stabilizing a high-voltage LiNi0.5Mn1.5O4 cathode towards all solid state batteries: a Li-Al-Ti-P-O solid electrolyte nano-shell with a host material

Enhancing Electrochemical Performance of LiMn2O4 Cathode Material at Elevated Temperature by Uniform Nanosized TiO2 Coating

Enhancing the Electrochemical Performance of High Voltage LiNi0.5Mn1.5O4 Cathode Materials by Surface Modification with Li1.3Al0.3Ti1.7(PO4)3/C

Sustainable Low-Temperature Coating of LATP/C Solid Electrolyte Composites on LiNi1/3Co1/3Mn1/3O2 Cathode Based on Lithium Iodide Solvent-Recrystallization for Li-Ion Batteries

Significant Improvement on Electrochemical Performance of LiMn2O4 at Elevated Temperature by Atomic Layer Deposition of TiO2 Nanocoating

Structure and electrochemical performance of single-crystal Li 1.05 Ni 0.1 Mn 1.9 O 3.98 F 0.02 coated by Li–La–Ti–O solid electrolyte

Enhanced high-temperature cycling stability of LiNi1/3Co1/3Mn1/3O2-coated LiMn2O4 as cathode material for lithium ion batteries

Enhancing the electrochemical performance of LiNi0.5Mn1.5O4 cathode material by a conductive LaCoO3 coating

From coating to doping: Effect of post-annealing temperature on the alumina coating of LiNi0.5Mn1.5O4 cathode material

Nano-TiO 2 (B) coated LiMn 2 O 4 as cathode materials for lithium-ion batteries at elevated temperatures

The Elevated Temperature Performance of LiMn2O4 Coated with Li4Ti5O12 for Lithium Ion Battery

Improving the electrochemical performance of Li1.2Ni0.13Co0.13Mn0.54O2 by Li-ion conductor

Electrochemical Performance of Layer–spinel Composite Cathode Materials at Elevated Temperature and High Rate

Effect of High-Temperature Crystallization on the Electrochemical Properties of LiNi0.5Co0.2Mn0.3O2 Synthesized from a Lithiated Transition Metal Oxide Precursor

Topotactic Phase Transformation of Lithiated Spinel to Layered LiMn0.5Ni0.5O2: The Interaction of 3-D and 2-D Li-ion Diffusion

Surface Modification of High Voltage Spinel LiNi 0.5 Mn 1.5 O 4 Cathode Material Manufactured via Co-precipitation

Structure and Electrochemical Performance of Modificated LiMn<sub>2</sub>O<sub>4</sub> by S-Co Codoping and Nano SiO<sub>2</sub> Surface Coating

Enhanced electrochemical performances of 5 v spinel LiMn 1.58Ni0.42O4 cathode materials by coating with LiAlO2