Abstract:A catalytic material is introduced into the polymer matrix to prepare a novel polymeric alkaline electrolyte membrane (AEM) which simultaneously increases ionic conductivity, reduces the fuel cross-over. In this work, the hydroxide anion exchange membrane is mainly composed of poly(vinylalcohol) and alkaline exchange resin. CoCl2 is added into the poly(vinylalcohol) and alkaline exchange resin gel before casting the membrane to introduce catalytic materials. CoCl2 is converted into CoOOH after the reaction with KOH solution. The crystallinity of the polymer matrix decreases and the ionic conductivity of the composite membrane is notably improved by the introduction of Co-species. A direct borohydride fuel cell using the composite membrane exhibits an open circuit voltage of 1.11 V at 30 degrees C, which is notably higher than that of cells using other AEMs. The cell using the composite membrane achieves a maximum power density of 283 mW cm(-2) at 60 degrees C while the cell using the membrane without Co-species only reaches 117 mW cm(-2) at the same conditions. The outstanding performance of the cell using the composite membrane benefits from impregnation of the catalytic Co-species in the membrane, which not only increases the ionic conductivity but also reduces electrode polarization thus improves the fuel cell performance. This work provides a new approach to develop high-performance fuel cells through adding catalysts in the electrolyte membrane.

Performance of direct formate-peroxide fuel cells

A high-performance direct formate-peroxide fuel cell with palladium–gold alloy coated foam electrodes

Comparative Performance Evaluation Of Self-Basifying Direct Formate Fuel Cells

Direct peroxide-peroxide fuel cell - Part 2: Effects of conditions on the performance

A Study of the Direct Dimethyl Ether Fuel Cell Using Alkaline Anolyte

In-Depth Understanding of Oxygen Transfer in the Catalyst Layer of High-Temperature Proton Exchange Membrane Fuel Cells

A Direct Borohydride Fuel Cell with a Polymer Fiber Membrane and Non-Noble Metal Catalysts.

High performance formic acid fuel cell benefits from Pd–PdO catalyst supported by ordered mesoporous carbon

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

A liquid-electrolyte-free anion-exchange membrane direct formate-peroxide fuel cell

Effects of Nafion ionomer content on the performance of membraneless direct formate fuel cells

Performance Research of Direct Dimethyl Ether Fuel Cell

High-Performance Polymer Fiber Membrane Based Direct Methanol Fuel Cell System with Non-Platinum Catalysts

Hydroxide Self-Feeding High-Temperature Alkaline Direct Formate Fuel Cells

An alkaline direct methanol fuel cell with a polymer fiber membrane and MnO2-catalyzed cathode

Understanding mass and charge transports to create anion-ionomer-free high-performance alkaline direct formate fuel cells

Performance of alkaline electrolyte-membrane-based direct ethanol fuel cells

The Behavior Of Palladium Catalysts In Direct Formic Acid Fuel Cells

Boosting Formate Electrooxidation by Heterostructured PtPd Alloy and Oxides Nanowires

A high-performance direct methanol fuel cell with a polymer fiber membrane and RuO2/CNTs as a cathode catalyst

Fluorination-enabled Interface of PtNi Electrocatalysts for High-Performance High-Temperature Proton Exchange Membrane Fuel Cells