Abstract:A key challenge for Lithium-ion batteries (LiB) is the capability to manage battery performance and predict the battery's lifetime, which are crucial information for optimum operation of electric-vehicles (EVs). In that regard, early detection of battery-aging phenomena and their implications on performance is necessary for maintaining warranty and avoiding safety-related liabilities. However, rapid diagnosis of the root causes of battery degradation has not yet been well-developed nor studied upon a broad mixture of cell designs and use cases. Here, a machine-learning (ML)- based framework is presented that aims at identifying aging modes or mechanisms during battery cycling. Cycle-by-cycle electrochemical signatures (e.g., end-of-rest voltages, columbic efficiency, and capacity fade) were analyzed then correlated with aging modes, such as loss of active materials in the cathode (LAM PE ) or loss of Li inventory (LLI). Multiple battery designs and use conditions were analyzed to develop this ML framework, including 44 single layer pouch cells representing two cathode chemistries (NMC532 and NMC811), two electrode loadings (low and moderate), and five charging rates (1, 4, 4.5, 6, and 9C CC-CV profiles). Predominant aging behaviors depend on both the cell design and use. Aging behaviors can be classified into a combination of LAM PE and LLI. A classification accuracy of 90% was achieved using only the first 200aging cycles, and the percentage of LAM PE was predicted with 4.3% of error after 600 cycles. As seen here, the overall aging behavior of the battery was found to be dependent on cathode chemistry, electrode build, and usage conditions. This ML framework is promising for battery developers to save the time and effort that is typically associated with prolonged testing. The ML framework will also advise on innovative design strategies to counter specific degradation modes, thus significantly accelerating the development cycle for building longer lasting batteries. From the end user's perspective, this aging-mode diagnosis framework enables the ability to fine-tune battery service scenarios to minimize degradations thereby improving both lifetime and safety in EVs or stationary storage systems. Figure 1

Understanding Aging Mechanisms in Lithium-Ion Battery Packs: from Cell Capacity Loss to Pack Capacity Evolution

Simulation Study on Heat Generation Characteristics of Lithium-Ion Battery Aging Process

Comprehensive Aging Model Coupling Chemical and Mechanical Degradation Mechanisms for NCM/C6-Si Lithium-Ion Batteries

Capacity Degradation and Aging Mechanisms Evolution of Lithium-Ion Batteries under Different Operation Conditions

Cell Replacement Strategies for Lithium Ion Battery Packs

Capacity fading mechanisms and state of health prediction of commercial lithium-ion battery in total lifespan

Aging Mechanisms and Evolution Patterns of Commercial LiFePO4 Lithium-Ion Batteries

Aging Mechanisms of Lithium-ion Batteries

Effects of cell-to-cell variations on series-connected liquid metal battery pack capacity

Aging mechanism analysis and capacity estimation of lithium - ion battery pack based on electric vehicle charging data

Quantitative Analysis of Origin of Lithium Inventory Loss and Interface Evolution over Extended Fast Charge Aging in Li Ion Batteries

A comparative study of commercial lithium ion battery cycle life in electrical vehicle: Aging mechanism identification

Critical Contribution of Imbalanced Charge Loss to Performance Deterioration of Si-Based Lithium-Ion Cells during Calendar Aging

Depletion of Electrolyte Salt Upon Calendaric Aging of Lithium-Ion Batteries and its Effect on Cell Performance

Interpretable Learning of Accelerated Aging in Lithium Metal Batteries

Incremental Capacity Analysis-Based Impact Study of Diverse Usage Patterns on Lithium-Ion Battery Aging in Electrified Vehicles

A Battery Aging Mode Identification Framework: Encompassing Multiple Cell Chemistries, Electrode Designs, and Use Conditions

Recognition of battery aging variations for LiFePO4 batteries in 2nd use applications combining incremental capacity analysis and statistical approaches

Theory of battery ageing in a lithium-ion battery: Capacity fade, nonlinear ageing and lifetime prediction

Unravelling and Quantifying the Aging Processes of Commercial Li(Ni0.5Co0.2Mn0.3)O2/Graphite Lithium-ion Battery under Constant Current Cycling

Mechanisms for the Evolution of Cell-to-cell Variations and Their Impacts on Fast-Charging Performance Within a Lithium-Ion Battery Pack