Abstract:Carbon coated hollow alpha-Fe2O3 spheres were prepared via a facile two-step hydrothermal method. The appearance and crystalline structure of the samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The morphology showed that the hollow spheres were composed of well crystallized nanoparticles after the first hydrothermal reaction and subsequent calcinations. A thin carbon film was coated on each Fe2O3 nanoparticles after the second hydrothermal procedure. This carbon coating was probably beneficial to maintain the microstructure of the active material during repeatable lithiation and delithiation. Afterwards, the samples were assembled into half-cells to investigate the electrochemical properties. The electrode delivered relatively high initial discharge/charge capacities of 1291/890 mA h g(-1) at the rate of 0.3 C. The reversible capacity maintained very well in a prolonged 140 cycles. The capacity retention was 89% after 70 cycles, and that was 81% after 140 cycles. This exceptional lithium storage property was probably attributed to the porous and hollow structure which allowed the penetration of electrolyte to the inner of the electrode, the nanoscale Fe2O3 particles which shortened the migration pathway for lithium ion, and the carbon coating which kept the active materials structure intact. The attractive electrochemical performance suggested the carbon coated hollow Fe2O3 spheres would be the potential anode material for future lithium ion battery.

Synthesis and Characterization of Multi-Layer Core–shell Structural LiFeBO3/C As a Novel Li-battery Cathode Material

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Mono-dispersed LiFePO4@C Core-Shell [001] Nanorods for a High Power Li-ion Battery Cathode

Olivine LiFePO4 Nanocrystallites Embedded in Carbon-Coating Matrix for High Power Li-ion Batteries

Metal-organic Frameworks-Derived CoMOF-D@Si@C Core-Shell Structure for High-Performance Lithium-Ion Battery Anode

Layer-by-layer synthesis of γ-Fe2O3@SnO2@C porous core-shell nanorods with high reversible capacity in lithium-ion batteries.

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

Synthesis and Electrochemical Performance of Core-Shell Structured LiNi0.5Mn1.5O4 Microspheres for Lithium Ion Batteries

Microsphere LiMn0.6Fe0.4PO4/C Cathode with Unique Rod-Like Secondary Architecture for High Energy Lithium Ion Batteries

Optimizing LiFePO₄@C core-shell structures via the 3-aminophenol-formaldehyde polymerization for improved battery performance.

Synthesis and Characterization of a Multi-Layer Core-Shell Composite Cathode Material LiVOPO4-Li3V2(PO4)3

Li3V2(PO4)3@C core-shell nanocomposite as a superior cathode material for lithium-ion batteries

B<sub>2</sub>O<sub>3</sub>/LiBO<sub>2</sub> dual-modification layer stabilized Ni-rich cathode for lithium-ion battery

Synthesis and Characterization of Hollow Alpha-Fe2o3 Spheres with Carbon Coating for Li-Ion Battery

Synthesis, Characterization and Electrochemical Performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2cathode Materials for Lithium-Ion Batteries

Architecting “Li-rich Ni-rich” core-shell layered cathodes for high-energy Li-ion batteries

Preparation of Dual Layers N-doped Carbon@Mesoporous Carbon@Fe3O4 Nanoparticle Superlattice and Its Application in Lithium-Ion Battery

Multicore-Shell Iron Fluoride @ Carbon Microspheres as Long-life Cathode for High-Energy Lithium Battery

Well-ordered Layered LiNi 0.8 Co 0.1 Mn 0.1 O 2 Submicron Sphere with Fast Electrochemical Kinetics for Cathodic Lithium Storage

Li[Li0.20Ni0.128Co0.136Mn0.536]O2 Cathode Material for Lithium-Ion Batteries

B2O3/LiBO2 dual-modification layer stabilized Ni-rich cathode for lithium-ion battery