Abstract:An air-breathing micro direct methanol fuel cell (mu DMFC) with a water collecting and recycling cathode structure is presented in this paper. The mechanism of water generation in cathode and water collection from the cathode is studied. The capillary channels with hydrophilic surface are designed along the ribs of the air-breathing cathode window to collect excessive water. The collected water is then released via an exhaust pipe. Microfabrication techniques, including double-side lithography and KOH etching, are used to fabricate the anode and cathode plates of the mu DMFC on the same silicon wafer simultaneously. The silicon plate surface is treated by low temperature oxygen plasma to improve the hydrophilicity. The mu DMFC with the water collecting and recycling structure and the regular one without, both with an active area of 7.8 x 7.8 mm(2), are assembled and characterized. Experimental results show that the maximum power density and current density of the both mu DMFCs are more than 10 mW cm(-2) and nearly 100 mA cm(-2) at room temperature, respectively. After both mu DMFCs operate at 0.15 V (about 60 mA cm(-2) at room temperature) for 1 h, the outputs of the prototype with water collecting and recycling structure decrease to about 9.7 mW cm(-2) and 95 mA cm(-2) only, while that of regular one decrease to 9 mW cm(-2) and 75 mA cm(-2). The water is collected by the exhaust pipe in evidence. As such, it would be possible to recycle the water from cathode to anode. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

A Water Management System for Metal-Based Micro Passive Direct Methanol Fuel Cells

Elimination of Water Flooding of Cathode Current Collector of Micro Passive Direct Methanol Fuel Cell by Superhydrophilic Surface Treatment

A new water management system for air-breathing direct methanol fuel cell using superhydrophilic capillary network and evaporation wings

A Hydrophobic Layer-Based Water Feedback Structure for Passive Μ-Dmfc

Passive cathodic water/air management device for micro-direct methanol fuel cells

A Micro Passive Direct Methanol Fuel Cell with High Performance Via Plasma Electrolytic Oxidation on Aluminum-Based Substrate

A Novel Cathode Gas Diffusion Layer for Water Management of Passive Μ-Dmfc

A passive micro direct methanol fuel cell with cross-structure cathode

A Water Collecting and Recycling Structure for Silicon-Based Micro Direct Methanol Fuel Cells

Improved DMFC water management via superwetting, high-performance catalyst synthesized by nanocapsule method

Capillary-based Water Removal Cathode for an Air-Breathing Micro Direct Methanol Fuel Cell

Enhanced Water Management Via the Optimization of Cathode Microporous Layer Using 3D Graphene Frameworks for Direct Methanol Fuel Cell

A self-breathing metallic micro-direct methanol fuel cell with the improved cathode current collector

A microfluidic-structured flow field for passive DMFCs operating with highly concentrated fuels

Constructing a Cathode Catalyst Layer of a Passive Direct Methanol Fuel Cell with Highly Hydrophilic Carbon Aerogel for Improved Water Management

Design and Fabrication of High Performance Passive Micro Direct Methanol Fuel Cell

An exploration of the solution of direct methanol fuel cell cost effectiveness

Stainless Steel Fiber Felt As Cathode Diffusion Backing and Current Collector for A Micro Direct Methanol Fuel Cell with Low Methanol Crossover

Design, Fabrication and Testing of an Air-Breathing Micro Direct Methanol Fuel Cell with Compound Anode Flow Field

Enhanced Water Management in the Cathode of an Air-Breathing PEMFC Using a Dual Catalyst Layer and Optimizing the Gas Diffusion and Microporous Layers

Investigation of a New Method to Prepare Low Methanol and Water Crossover Membrane Electrode Assembly for Passive Direct Methanol Fuel Cells