Abstract:Sodium-ion batteries (SIBs) have emerged as a promising alternative to lithium-ion batteries (LIBs) due to the abundance and low cost of sodium resources. Cathode material plays a crucial role in the performance of sodium ion batteries determining the capacity, cycling stability, and rate capability. Na3V2(PO4)3 (NVP) is a promising cathode material due to its stable three-dimensional NASICON structure, but its discharge capacity is low and its decay is serious with the increase of cycle period. We focused on modifying NVP cathode material by coating carbon and doping Nb5+ ions for synergistic electrochemical properties of carbon-coated NVP@C as a cathode material. X-ray diffraction analysis was performed to confirm the phase purity and crystal structure of the Nb5+ doped NVP material, which exhibited characteristic diffraction peaks that matched well with the NASICON structure. Nb5+-doped NVP@C@Nbx materials were prepared using the sol–gel method and characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Raman and Brunauer -Emmett-Teller (BET) analysis. First-principles calculations were performed based on density functional theory. VASP and PAW methods were chosen for these calculations. GGA in the PBE framework served as the exchange-correlation functional. The results showed the NVP unit cell consisted of six NVP structural motifs, each containing octahedral VO6 and tetrahedral PO4 groups to form a polyanionomer [V2(PO4)3] along with the c-axis direction by PO4 groups, which had Na1(6b) and Na2(18e) sites. And PDOS revealed that after Nb doping, the d orbitals of the Nb atoms also contributed electrons that were concentrated near the Fermi surface. Additionally, the decrease in the effective mass after Nb doping indicated that the electrons could move more freely through the material, implying an enhancement of the electron mobility. The electrochemical properties of the Nb5+ doped NVP@C@Nb cathode material were evaluated through cyclic voltammetry (CV), galvanostatic charge-discharge tests, electrochemical impedance spectroscopy (EIS), and X-ray photoelectric spectroscopy (XPS). The results showed that NVP@C@Nb0.15 achieved an initial discharge capacity as high as 114.27 mAhg−1, with a discharge capacity of 106.38 mAhg−1 maintained after 500 cycles at 0.5C, and the retention rate of the NVP@C@Nb0.15 composite reached an impressive 90.22%. NVP@C@Nb0.15 exhibited low resistance and high capacity, enabling it to create more vacancies and modulate crystal structure, ultimately enhancing the electrochemical properties of NVP. The outstanding performance can be attributed to the Nb5+-doped carbon layer, which not only improves electronic conductivity but also shortens the diffusion length of Na+ ions and electrons, as well as reduces volume changes in electrode materials. These preliminary results suggested that the as-obtained NVP@C@Nb0.15 composite was a promising novel cathode electrode material for efficient sodium energy storage.

Uniform and Continuous Carbon Coated Sodium Vanadium Phosphate Cathode Materials for Sodium-Ion Battery

Carbon coated Na3+xV2-xCux(PO4)3@C cathode for high-performance sodium ion batteries

A robust carbon coating of Na3V2(PO4)3 cathode material for high performance sodium-ion batteries

High performance cathode material based on Na3V2(PO4)2F3 and Na3V2(PO4)3 for sodium-ion batteries

Diatomic Doped Carbon Coating Boosting the High-Rate Performance and Super Long-Cycle Stability of Na3v2(Po4)3 Cathode Material

High-rate performance and super long-cycle stability of Na3V2(PO4)3 cathode material coated by diatomic doped carbon

High Rate Capability and Enhanced Cyclability of Na3 V2 (PO4 )2 F3 Cathode by in Situ Coating of Carbon Nanofibers for Sodium-Ion Battery Applications.

High‐Rate, Durable Sodium‐Ion Battery Cathode Enabled by Carbon‐Coated Micro‐Sized Na3V2(PO4)3 Particles with Interconnected Vertical Nanowalls

Dual-Carbon-Decorated Na3V2(PO4)3 Material for Sodium-Ion Batteries

Carbon-coated Na 3 V 2 (PO 4 ) 3 nanocomposite as a novel high rate cathode material for aqueous sodium ion batteries

Electrospun Na3v2(Po4)(3)/C Nanofibers As Stable Cathode Materials for Sodium-Ion Batteries

Coating a Na3V2(PO4)3 cathode material with carbon to improve its sodium storage

Ultra-stable carbon-coated sodium vanadium phosphate as cathode material for sodium-ion battery

Nitrogen-doped Carbon Coated Na3V2(PO4)3 with Superior Sodium Storage Capability

Preparation of Nb5+ Doped Na3V2(PO4)3 Cathode Material for Sodium Ion Batteries

Ration Design of Porous Mn-doped Na3V2(PO4)3 Cathode for High Rate and Super Stable Sodium-Ion Batteries

Facile One-Step Carbothermal Reduction Synthesis of Na3V2(PO4)2F3/C Serving As Cathode for Sodium Ion Batteries

Preparation of Na3V2(PO4)3 Cathode Materials by Hydrothermal Assisted Sol-Gel Method for Sodium -Ion Batteries

In-situ Construction of Porous Carbon Substrate from Sodium Carboxymethyl Cellulose Boosting Ultra-Long Lifespan for Na3V2(PO4)3 Cathode Material

Continuous-flow Rapid and Controllable Microfluidic Synthesis of Sodium Vanadium Fluorophosphate As a Cathode Material

Vanadium substituted Fe, Cr co-doped high performance C/Na3V2(PO4)2F3 cathode for sodium-ion batteries