Abstract:Structure engineering for non-precious-metal catalyst plays the major roles in governing the activity and stability for oxygen evolution/reduction reactions (OER/ORR). Herein, via an electrospinning method, one-dimensional (1D) carbon fibers containing MIL-53 (Fe) and Co3+ are obtained as precursor for preparation of Fe3C/CoFe2O4-embedded carbon nanofibers (Fe3C/CoFe2O4@CNFs). Scanning electron microscopy image of Fe3C/CoFe2O4@CNFs-1.5 (mass ratio of MIL-53(Fe) to CoCl3·6H2O is 1.5) shows that it has a well-formed 1D structure with diameters of 200–300 nm. Hydrophilic surface with a contact angle of 16.5° is detected for Fe3C/CoFe2O4@CNFs-1.5 (250.1 m2 g−1), which shows a promising bifunctional activity with ΔE = 0.73 V (E1/2 = 0.84 V (ORR) and Ej10 = 1.57 V (OER)). For ORR, E1/2 of Fe3C/CoFe2O4@CNFs-1.5is close to that of commercial Pt/C (0.85 V),while its activity maintenance (92.5%) is much better than Pt/C (78.4%) after 30000 s, indicating that low-valence interfaces of CoFe2O4 (Co2+) and Fe3C (Fe2+) can provide multiple active sites to stabilize ORR rate. For OER, Fe3C/CoFe2O4@CNFs-1.5 has a low overpotential of 340 mV at 10 mA cm−2 and a high Faraday efficiency of 92.13%. Co2+ acts as an initiator to boost the formation of active CoOOH for OER. Oxygen vacancies on the reverse spinel structure of CoFe2O4 make the surface Co2+ easier to be oxidized to Co3+ (CoOOH). Fe3C/CoFe2O4 wrapped in carbon fiber lowers their aggregation and corrosion during ORR/OER. Networks constructed by the interconnected 1D nanofibers can provide 3D pathways for mass transfer. It indicates that bimetallic species (Fe/Co) can change the electronic and interface structures to promote bifunctional activity.

Highly active non-precious metal catalyst based on poly(vinylpyrrolidone)–wrapped carbon nanotubes complexed with iron–cobalt metal ions for oxygen reduction reaction

Highly Active Cofe Alloy Nanoparticlesencapsulated in N-Doped Carbon Nanostructures for Oxygen Reduction Reaction in Both Alkaline and Acidic Media

Carbon nanotubes supported Fe-based compounds as the electrode catalyst for oxygen reduction reaction

A Highly Active and Durable Iron/cobalt Alloy Catalyst Encapsulated in N-doped Graphitic Carbon Nanotubes for Oxygen Reduction Reaction by a Nanofibrous Dicyandiamide Template

Transition Metal (Fe, Zn, Co, and Ni) Single-Atom Catalysts Anchored on N,S-Codoped Hybrid Nanocarbons for Oxygen Reduction Reaction

Improving the Catalytic Performance of Co/N/C Catalyst for Oxygen Reduction Reaction by Alloying with Fe

A highly active and durable iron/cobalt alloy catalyst encapsulated in N-doped graphitic carbon nanotubes for oxygen reduction reaction

Nitrogen-Doped Carbon Nanotubes Encapsulated Cobalt Nanoparticles Hybrids for Highly Efficient Catalysis of Oxygen Reduction Reaction

Highly dispersed Co and Ni nanoparticles encapsulated in N-doped carbon nanotubes as efficient catalysts for the reduction of unsaturated oxygen compounds in aqueous phase

Noncovalent composites of meso-substituted A2B2-porphyrins and carbon nanotubes for enhanced electrocatalytic oxygen reduction

Fe3C/CoFe2O4 nanoparticles wrapped in one-dimensional MIL-53(Fe)-derived carbon nanofibers as efficient dual-function oxygen catalysts

Short nanotubular Fe-N-C catalysts with curved catalytic sites and contributing regions for oxygen reduction reaction

Enhanced Catalytic Performance of FeCoNi/N-Doped Carbon Nanospheres as Bifunctional Oxygen Catalysts

High Crystallinity Binuclear Iron Phthalocyanine Catalyst with Enhanced Performance for Oxygen Reduction Reaction

Restructured Fe−Mn Alloys Encapsulated by N‐doped Carbon Nanotube Catalysts Derived from Bimetallic MOF for Enhanced Oxygen Reduction Reaction

Highly active CoFe alloy nanoparticles encapsulated in N-doped carbon nanostructures for oxygen reduction reaction in both alkaline and acidic media

Theophylline-regulated pyrolysis synthesis of nitrogen-doped carbon nanotubes with iron-cobalt nanoparticles for greatly boosting oxygen reduction reaction

Controllable synthesis of nitrogen-doped carbon containing Co and Co3Fe7 nanoparticles as effective catalysts for electrochemical oxygen conversion

Rational Design of Highly Efficient Metal-Polyaniline/carbon Cloth Catalyst Towards Enhanced Oxygen Reduction Reaction

Integrated Three-Dimensional Carbon Nanopolyhedron/Metal Sulfides: An Efficient Electrocatalyst Toward Oxygen Reduction Reaction

Modulating the Electronic Structure of FeCo Nanoparticles in N‐Doped Mesoporous Carbon for Efficient Oxygen Reduction Reaction