A simultaneous study on desulphurization and denitrogenation using acid‐treated activated alumina: Multi‐component adsorption systems
Naushad Khan,G. K. V. Rami Reddy,Sandeep Kumar Thaligari,Vimal Chandra Srivastava,Raj Kumar Singh,Anuj Rawat,Paritosh Mohanty
DOI: https://doi.org/10.1002/cjce.25392
2024-07-13
The Canadian Journal of Chemical Engineering
Abstract:In this study, sulphuric acid‐treated activated alumina (AA) was used for sulphur and nitrogen removal from model fuel in a batch adsorption study. Dibenzothiophene (DBT), a sulphur compound, and quinoline, a nitrogen compound dissolved in isooctane, were taken as a model liquid fuel. Detailed characterization of the adsorbent, such as scanning electron microscopy (SEM), thermogravimetric analysis‐differential thermal analysis (TGA‐DTA), Fourier transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET), and X‐ray diffraction (XRD), was performed to understand the DBT and quinoline adsorption mechanism onto AA adsorbent. Sulphur and nitrogen removal efficiencies were found to be 64% and 91%, respectively. Mono‐component adsorption isotherm was studied by using different models such as Langmuir, Freundlich, and Redlich‐Peterson (R‐P) isotherms. The R‐P isotherm model well‐predicted the individual equilibrium data for both nitrogen and sulphur from the liquid fuel. Binary‐component adsorption studies were performed by mixing both DBT and quinoline in isooctane. Binary‐equilibrium data were modelled by multi‐component models such as modified Langmuir isotherm, non‐modified Langmuir, extended Langmuir, extended Freundlich isotherm, Sheindorf‐Rebuhn‐Sheintuch (SRS), non‐modified R‐P model, and modified R‐P model. The extended Freundlich (E‐F) adsorption isotherm model was found to best fit the binary equilibrium system.
engineering, chemical