Activated carbon modification for real diesel adsorptive deep desulfurization: experiments and modeling
Kyriakos Fotiadis,Margaritis Kostoglou,Penelope Baltzopoulou,Vasileios Zaspalis,George Karagiannakis,Kyriakos FotiadisMargaritis KostoglouPenelope BaltzopoulouVasileios ZaspalisGeorge Karagiannakisa Center for Research and Technology – Hellas/Chemical Process and Energy Resources Institue,Advanced Renewable Technologies & Environmental Materials in Integrated Systems Laboratory,(ARTEMIS/CPERI/CERTH),Thessaloniki,Greeceb Department of Chemical Engineering,Aristotle University of Thessaloniki,Thessaloniki,Greecec Department of Chemistry,Aristotle University of Thessaloniki,Thessaloniki,Greece
DOI: https://doi.org/10.1080/00986445.2024.2341265
2024-04-13
Chemical Engineering Communications
Abstract:This study examined the desulfurization capacity of a high specific surface area activated carbon (AC) and its modifications for real diesel fuel of different sulfur concentrations. Adsorbent's evaluation strategy included desulfurization experiments under batch and continuous conditions. Batch experiments were conducted by a homogeneous stirring of adsorbent and diesel fuel, while for the continuous tests, a fixed bed reactor was used to generate breakthrough desulfurization curves. In the fixed bed reactor's tests, the sulfur removal – considering an initial concentration of about 6 parts per million weight (ppmw) – was substantial for the first 30 ml fuel per gram of adsorbent. For this specific quantity, the total sulfur content of the cumulatively processed fuel was less than 2 ppmw. The batch experimental results are elaborated using a mechanistic kinetic model for batch adsorption considering the total sulfur mass balance. Mass transfer coefficients are derived this way for all the conditions and adsorbents tested. The adsorption equilibrium data from batch experiments are utilized to model the fixed bed experimental results. In this way, mass transfer coefficients for the fixed bed are derived. In any case, the modeling results indicate that sulfur is not the only adsorbate of the process, but other adsorbates act competitively to sulfur, thereby complicating the process.
engineering, chemical