Abstract:A series of mesoporous MgO samples with different morphologies were synthesized through a simple hydrothermal treatment and NaNO3/NaNO2 were used as promoters to enhance CO2 capture capacity at an intermediate temperature range (200–400°C). The effects of hydrothermal solution pH and content of promoters were examined to determine the optimal synthesis conditions. The influence of operational temperatures, CO2 partial pressure, and performance over repeated cycles was investigated and the reaction mechanism was discussed. The mesoporous MgO promoted by NaNO3/NaNO2 exhibited a CO2 capture capacity as high as 19.8mmolg−1 at 350°C in the presence of 0.85bar of CO2 within only 50min. A “three-stage” reaction process was proposed based on a detailed sorption kinetics study, namely Stage I: initiating interactions between CO2 and exposed MgO; Stage II: generation and accumulation of Mg2+ and CO32−; and Stage III: fast carbonation. Gradual deterioration of sorbents was found over the first 5 cycles followed by stable regenerability in the 5−15th cycles. A kinetic study of the 15th cycle suggests that the deactivation of sorbents inhibited the accumulation of Mg2+ and CO32− in Stage II and suppressed the carbonation in Stage III. A range of characterizations were undertaken revealing the morphology and structure of both fresh and regenerated sorbents. The results confirmed that, other than the sintering effect due to phase transition, the transformation of MgO skeleton is also an important contributor to the gradual deactivation of the sorbents over the first 5 cycles. More severe sintering effect under harsh decarbonation conditions suppressed the stability of the sorbents over cycles.

Regenerable magnesium-based sorbent for high-pressure and moderate-temperature CO 2 capture: Physicochemical structures and capture performances

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Characteristics of MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Synthesis of a Porous Nano‐CaO/MgO‐Based CO2 Adsorbent

Combined CO2-philicity and Ordered Mesoporosity for Highly Selective CO2 Capture at High Temperatures

Efficient MgO-doped CaO sorbent pellets for high temperature CO2 capture

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO_2 Capture

Fabrication Of A New Mgo/C Sorbent For Co2 Capture At Elevated Temperature

Reactivity and Microstructure of Synthetic CaO-based Sorbents for CO2 Capture

Mesoporous MgO Promoted with NaNO3/NaNO2 for Rapid and High-Capacity CO2 Capture at Moderate Temperatures

Hierarchically Porous Mg-MOF-74/Sodium Alginate Composite Aerogel for CO 2 Capture

MgO-Based Granular Sorbent Pelletized by Using Ordered Mesoporous Silica As Binder for Low-Temperature CO2 Capture

Self-Assembled Core-Shell Structure MgO@TiO2 as a K2CO3 Support with Superior Performance for Direct Air Capture CO2

MgO-Based Granular Sorbent Pelletized by Using Ordered Mesoporous Silica as Binder for Low-Temperature CO 2 Capture

Acquiring an Efficient Warm‐CO2 Sorbent from Advanced Pyrolysis of Magnesium Oxalate

MgO promoted by Fe2O3 and nitrate molten salt for fast and enhanced CO2 capture: Experimental and DFT investigation

Accurate Descriptions of Molecule-Surface Interactions for Understanding CO2 Capture by MgO-based Sorbents in Wet Conditions

Recent Advances on Kinetics of Carbon Dioxide Capture Using Solid Sorbents at Elevated Temperatures

Core‐shell structured CaO‐based pellets protected by mesoporous ceramics shells for high‐temperature CO2 capture